FACTORY DIRECTOEM & CUSTOMEXPORT READYMIXED CONTAINER
300+Containers Shipped Since 2016
4 x 40'FCLMonthly Capacity
1 x 20'FCLMinimum Mixed Container
12 WeeksTypical Lead Time
Manufacturer & Exporter of Teak Root Furniture · Established 2016 · Jepara, Indonesia · Shipping Worldwide
Teak Root Furniture Manufacturer for European Importers

Teak Root Furniture Manufacturer for European Importers

Handcrafted teak root furniture from Jepara, Indonesia. Indoor and outdoor collections for wholesale and export buyers.

Sculptural Teak Root Dining Tables

Sculptural Teak Root Dining Tables

Solid teak root and glass-top dining tables, produced to order and prepared for container shipment.

Organic Coffee and Side Tables

Organic Coffee and Side Tables

Natural root-base coffee and side tables — statement pieces for retail and interior projects.

Wholesale and Custom Production

Wholesale and Custom Production

Custom and OEM production for importers, retailers and hospitality projects worldwide.

Request Our Catalogue and Price List

Request Our Catalogue and Price List

Send us your target items and quantities — our team will prepare a quotation for you.

Friday, October 2, 2026

Bulk Teak Root Furniture — 4×40'FCL a Month

A 20-foot container measures about 33 cubic metres and takes 26 to 28 cubic metres of cartoned furniture \u2014 weight almost never limits a teak root load, because a full box of dining tables cubes out near 2.5 tonnes against a 28-tonne payload. So the number that decides your landed cost is cubic metres per piece, not kilograms. A 200 cm teak root dining table at USD 240 FOB is cheap only if the space around its base is planned before the quotation is signed.

Summary: Made in Jepara, Indonesia. FOB Semarang, one 20ft container with mixed models. Freight in October 2026: what the index shows and what it hides Drewry's World Container Index stood at USD 4,585 per 40-foot container on 22 October 2026, up 2% on the week.

Teak root table with one-off root base, sanded and finished by hand
Suar wood stool with sculptural base, natural finish

Most buyers who ask for a bulk quotation compare the wrong number. They look at the FOB price of a 200 cm teak root dining table — say USD 240 — and treat freight and duty as a percentage somebody will sort out later. Root furniture punishes that habit: a root table cannot be nested, knocked down or stacked flat, and the space around its base travels with it.

A 20-foot container measures about 33 cubic metres; loaded with cartoned furniture you use 26 to 28. Weight almost never limits a root load: a full box of dining tables cubes out at roughly 2.5 tonnes against a 28-tonne payload, so the container is full while the floor is barely loaded. Any quotation priced per kilogram quotes the wrong unit.

Two dates make this a difficult year to buy blind. From 30 December 2026 the EU Deforestation Regulation applies to large and medium operators, small operators following on 30 June 2027 (European Commission, 2026). Indonesian goods entering the United States have carried a 19% reciprocal tariff since the bilateral agreement of February 2026, down from 32% (U.S. Trade Representative, 2026).

What a container really holds: teak root dining tables by the cubic metre

Packed volume decides how many pieces you get. These figures come from our loading records for 2024 to 2026, measured on cartoned goods going into the box, not on product dimensions. They are ranges because two tables with the same top size can differ by 15% in displaced volume.

ItemPacked volume per pieceWeightUnits per 20'FCL (26–28 CBM)Units per 40'HC (62–65 CBM)
Teak root dining table, 180–200 cm1.0–1.2 CBM85–120 kg22–2752–63
Teak root dining table, 240 cm1.5–1.8 CBM130–165 kg15–1835–42
Teak root coffee table with glass top, 120 × 70 cm0.45–0.55 CBM45–65 kg49–60115–140
Teak root console table, 150 cm0.50–0.65 CBM40–55 kg42–5498–128
Teak root stool or bench, 45 cm0.10–0.15 CBM12–18 kg180–270420–630
Teak root planter, 60 cm0.25–0.35 CBM25–35 kg77–108180–255

Read the table as a cost sheet. At USD 3,632 per 40-foot container out of Asia (Drewry World Container Index, 22 October 2026), a 20-foot booking lands near USD 2,900, or about USD 108 per cubic metre. A 200 cm dining table carries roughly USD 120 of ocean freight, a coffee table with glass top about USD 55, a stool about USD 13 — which is why a container of stools is cheap to buy and expensive to move. Ask every supplier for packed CBM per SKU in writing; one who answers in container counts is guessing, and those guesses run 10–20% optimistic on root furniture.

Building a mixed 20'FCL: teak root coffee tables with glass tops, consoles and stools

Almost no buyer starts with a full container of one model, and that is right. A first 20-foot order on a 60/25/15 split fills the box and tells you which family sells before you commit to a 40-foot repeat.

  • 60% anchor family. Teak root dining tables, two or three sizes between 180 and 240 cm. These carry the container's value.
  • 25% volume fillers with retail appeal. Teak root coffee tables with glass tops and teak root console tables: compact to pack, good in a showroom, a cheaper entry price for a retailer.
  • 15% gap fillers. Teak root stools, benches and planters, filling dead space above low tables and beside irregular bases — but only when they genuinely fill gaps rather than replace tables.

Write the RFQ so two suppliers can be compared line by line: SKU code, dimensions, finish (natural, bleached, walnut stain, burnt), glass specification, packing method, packed CBM, and the Incoterm you want. A quotation for "one container of mixed furniture" is not comparable. The document set is in our guide to furniture import documents.

Ready to price a container? Send us your item list and quantities, and we will tell you what fits in one 20-foot load, quote FOB Semarang per SKU, and give you a lead time we can hold to rather than one that sounds good in an email.

Send your item list for a quote →

Two rules changed in 2026 — and they reach teak root console table shipments first

From 30 December 2026, operators placing wood products on the EU market must file a due diligence statement in TRACES NT before release, backed by the coordinates of the plots where the timber was harvested. Under the Commission's third-edition guidance (2026), downstream traders do not repeat the exercise where a valid upstream statement exists — so the importer of record carries the burden and the supplier must hand over plot data that stands up. The simplification package of 4 May 2026 trimmed the process and, by the Commission's own estimate, cuts annual compliance cost by around 75%. It did not remove traceability.

Teak root has an advantage here that we did not choose for marketing reasons. The material is the stump and root ball of plantation teak (Tectona grandis) from Central Java, mostly state plantation blocks replanted on a cycle, so each batch traces to a defined block rather than a forest frontier. What the buyer needs is unglamorous: species, harvest permit references, SVLK certificate numbers and coordinates per batch. Indonesia's SVLK scheme was the first national timber legality system recognised under the EU's FLEGT programme (2017).

  • Ask for plot coordinates and harvest dates per batch, before production rather than after.
  • File one due diligence statement per consignment, not per supplier relationship.
  • Check HS codes line by line, and build two extra weeks into your first EUDR-era shipment.

In the United States the arithmetic is different. The 19% rate applies to the customs value, and on top sit the Section 232 duties of 14 October 2025: 10% on timber and lumber, 25% on certain upholstered wooden furniture, cabinets and vanities. A proclamation of 31 December 2025 postponed the planned increases — 30% and 50% — to 1 January 2027, so 25% holds through 2026 (U.S. Customs and Border Protection; trade counsel summaries, January 2026). Plain wooden tables and consoles under heading 9403.60 sit outside that annex, which usually leaves 19% as the whole duty — but "usually" is doing real work there, so have your broker confirm the HTS line. The Lacey Act declaration still applies.

DateWhat happensWho it hits
14 Oct 2025US Section 232 duties: 10% timber and lumber, 25% upholstered wooden furniture, cabinets, vanitiesUS importers of seats and cabinetry
31 Dec 2025Step-ups to 30% and 50% postponed to 1 January 2027US importers budgeting through 2026
Feb 2026US–Indonesia Agreement on Reciprocal Trade signed; 19% confirmed, down from 32%All Indonesian exports to the US
4 May 2026EUDR simplification package published; compliance cost estimated to fall by around 75%EU operators and traders
29 Jun 2026EU–Indonesia CEPA presented to Council; duties removed on 98.5% of lines, ratification pendingEU importers planning 2027 budgets
30 Dec 2026EUDR applies to large and medium operatorsEU importers, distributors, retail chains
30 Jun 2027EUDR applies to micro and small operatorsSmall EU retailers and importers

One warning on CEPA: the agreement is not in force, and a container arriving in early 2027 will still be assessed under the old schedule, with wooden furniture at around 2.7%.

Landed cost on one container, worked line by line

Here is the same container priced end to end: 12 dining tables at 200 cm, 16 coffee tables with glass tops, 8 consoles and 10 stools. Forty-six pieces, 26.8 CBM, full by volume and light by weight. Prices and freight are illustrative for the fourth quarter of 2026; substitute your own quote and the structure holds.

LineBasisAmount (USD)
FOB Semarang46 pieces, 26.8 CBM6,940
Ocean freight20'FCL to Rotterdam, Q4 2026 level2,900
CIF valueFOB plus freight9,840
EU duty2.7% of CIF, wooden furniture (TARIC)266
Terminal handling and clearanceRotterdam, including broker fee380
Inland deliveryRotterdam to Venlo250
Landed, duty paid, ex-VAT154% of FOB10,736
Import VAT21% Dutch rate, recoverable2,122
Landed cost per CBM10,736 ÷ 26.8401

Three things fall out of that sheet. The container adds about 55% to the FOB value before VAT, so a 200 cm table costing USD 245 on the quay lands at roughly USD 400. VAT is not a cost if you recover it, but 21% on a five-figure container is real cash for six to ten weeks. And the same load into the United States looks worse: 19% of a comparable CIF value is about USD 1,965 against USD 266 in the EU, or USD 37 more per unit across 46 pieces.

Freight in October 2026: what the index shows and what it hides

Drewry's World Container Index stood at USD 4,585 per 40-foot container on 22 October 2026, up 2% on the week. Route numbers matter more than the composite: Shanghai to Rotterdam at USD 3,632, Shanghai to Genoa at USD 4,152. Those are spot rates for mainline legs, and Semarang is not a mainline port. Containers are trucked two hours from our yard to the terminal, then feedered through Singapore or Port Klang, adding five to ten days and a feeder charge that appears as its own line.

  • Ask for an all-in quote to your door, not port-to-port, and ask what is excluded.
  • Check the rate's validity window: fourteen to thirty days is normal, anything longer is a guess.
  • Confirm free time at destination — root furniture is slow to unpack, and demurrage can outrun your discount.
  • Book three to four weeks before the cargo is ready, and keep the booking reference in writing.

Our standard term is FOB Semarang, which keeps the ocean leg in your hands and your forwarder's rates. We also quote CIF; comparing that figure with your own forwarder is the fastest way to test whether an all-in quote is competitive.

Where the volume comes from: teak root benches and planters cut in Jepara, Indonesia

The supply of this material is a by-product story. Teak in Central Java grows on plantations and is harvested on a rotation; the stump and root ball, several hundred kilos of it, is dug out when a block is cleared and replanted. For decades it was burned or left in the ground. What turned it into furniture was the carving trade in Jepara, a town on Java's north coast where families have cut relief work for generations and, since the 1990s, root tables for export.

Our workshop sits in that town — Jepara, Central Java, Indonesia — and the process is slower than a photograph suggests. Roots are pressure-washed, air-dried and kiln-dried to 10–12% moisture content before machining, because teak root moves and checks if worked wet. That drying is the real reason a first order runs about 12 weeks rather than four, and in the rainy season from November to March it takes longer; buyers who order in January and expect a May sailing usually end up air-freighting samples.

Since 2016 we have shipped more than 300 containers, currently loading up to 4 × 40'FCL per month, almost all to Europe and North America. That volume is what makes a mixed 20-foot order possible at all: a workshop running single-model batches cannot afford to switch finishes four times inside one container.

If you are about to import teak root furniture from Indonesia for the first time, the cheapest due diligence is a flight. Buyers are welcome to walk the yard and pick their own root bases before the finish goes on. Few do, and those who do become repeat customers.

Frequently Asked Questions

How many teak root dining tables fit in a 20-foot container?

Between 22 and 27 at 180–200 cm, or 15–18 at 240 cm, because packed volume runs 1.0–1.2 and 1.5–1.8 CBM. Weight is never the constraint: a full box of tables weighs about 2.5 tonnes.

What does EUDR require from me if I import a mixed container of root tables?

As the operator placing goods on the EU market you file a due diligence statement in TRACES NT before release, keeping plot coordinates, species and harvest references behind it. Large and medium operators are covered from 30 December 2026, micro and small from 30 June 2027.

Is the 19% US tariff the whole duty on a teak root console table?

For plain wooden tables and consoles under heading 9403.60, yes — the Section 232 measures target timber and lumber, upholstered seating, cabinets and vanities. Confirm the HTS line with your broker; the Lacey Act declaration is separate. Upholstered seating: 25% now, 30% from 1 January 2027.

Can one container mix dining tables, coffee tables and stools?

Yes — one 20-foot mixed container is our minimum order, and it is how most first orders are built. Balance by volume, not unit count: 12 dining tables, 16 coffee tables and 10 stools fill a 20-foot box far better than 40 stools.

How long from purchase order to loading?

Twelve weeks for a first order, including sample approval, drying and finishing. Repeat orders run shorter. Payment is 50% deposit with the balance before shipment, and every container is inspected against the packing list before it leaves Jepara.

Talk to us about your project

Send the item list you are working from — models, sizes, finish, quantities — and we will come back with what fits in one load, the FOB Semarang price per SKU and the packed volume, so you can run the landed cost yourself.

Send your item list for a quote →

Packing, loading and shipping

Every piece is wrapped in stretch film, corner-protected and packed in a single-face carton; glass tops travel in separate wooden crates marked with their model code. Tables are loaded top-down with the base uppermost and foam-blocked so no weight rests on the thinner root limbs. The packing list is built line by line against your order, and we send the load plan to your broker before the truck leaves.

Where does the container actually leave from?
The container is loaded at our yard in Jepara on Java's north coast, about two hours by road from the port of Semarang. Goods are checked against the packing list as they go in, sealed, trucked to the terminal and lifted onto the vessel. FOB Semarang is our standard term, so the ocean freight sits on your side of the transaction and your forwarder's rates apply.

Our office and factory stand at the same address on every document we issue: Jl. RA Rukmini KM.02 Pekalongan RT.02/V, Tahunan, Jepara 59428, Central Java, Indonesia.

MOQ 1×20'FCL mixed · up to 4×40'FCL per month · 300+ containers shipped since 2016 · export@teakrootfurniture.com · WhatsApp +62 852 0600 7878

Written by

Mr. August Praymunor — Overseas Marketing Director

CV. Nusantara Sourcing Agent · manufacturer and exporter of teak root furniture in Jepara, Central Java, Indonesia. We have shipped over 300 containers since 2016, loading 4×40’FCL per month for importers, hotel groups and interior contractors in Europe and North America. Every figure in this article comes from the sources noted in the text or from our own shipping records.

export@teakrootfurniture.com · WhatsApp +62 852 0600 7878 · LinkedIn · Jl. RA Rukmini KM.02 Pekalongan RT.02/V, Tahunan, Jepara 59428, Central Java, Indonesia

See also

Modellseiten — Preis, CBM und Containerladung

Eine Seite pro Modell: Größe, Packvolumen, FOB-Preis Semarang und wie viele in einen 20-Fuß-Container passen.

Alle Modellseiten →

Share this page:>

0 comments:

Post a Comment