Most first-container disputes in this trade are not about furniture. They are about money that moved ahead of the paperwork: a buyer wires a 50% deposit against a specification that lives in a chat thread, and the container is packed before anyone agrees what "finished" means. None of this is about craft. It is about structure, the one part of a first order a buyer can control completely.
Summary: Made in Jepara, Indonesia. FOB Semarang, one 20ft container with mixed models. Something like this: Point What happens Money event Week 0 Specification, prices, trade term, payment terms confirmed in writing Deposit invoice issued Week 1 Deposit received; materials and schedule confirmed by the workshop 50% deposit paid Weeks 1–10 Production runs; progress photographs at agreed points — Week 11 Goods finished; pre-packing photographs, optional third-party inspection — Week 12…
Most first-container disputes in this trade are not disputes about furniture. They are disputes about money that moved ahead of the paperwork. A buyer wires a 50% deposit against a specification that lives in a chat thread; the container is packed before anyone has agreed what "finished" means; and then a valuation line, a timber-legality question or a VAT treatment stalls the release while the goods sit on the quay accruing storage. None of these failures are about craft. They are about structure — and structure is the one part of a first order a buyer can control completely.
This is a working guide to the deposit, the inspection and the balance on a first shipment, written around the Netherlands and the wider EU because the terms there have moved sharply in 2026. The principles transfer; the numbers do not, so replace them with your own quotes.
Why the terms matter more in the Netherlands this year
Dutch real estate came back to life in the first half of 2026: investment volume reached €7 billion, 36% higher than the same period in 2025 and nearly 5% above the ten-year average for a first half (CBRE Netherlands Midyear Review, September 2026). Hotels have been part of that recovery — CBRE had expected the Dutch hotel investment market to trade €450–500 million through 2025, up from a weak 2024.
At the same time, the cost of running a Dutch hotel rose on 1 January 2026, when national VAT on short-stay accommodation went from 9% to 21% (Belastingdienst, 2026). In Amsterdam that now stacks on top of the city's own tourist tax, which sits around 12.5%. The practical consequence for a fit-out buyer is straightforward: operating margins are tighter, so every line of the capital budget — including the furniture — is examined rather than waved through. When the numbers are tight, the payment structure of a first order matters more, not less.
There is a second reason 2026 is different. From 30 December 2026 the EU Deforestation Regulation applies to large and medium operators placing wood products on the EU market, with micro and small operators following on 30 June 2027 (European Commission, 2026). Payment and paperwork now travel together: a deposit should not leave your account before you have agreed not only the commercial terms but the evidence trail that will support your compliance file.
What should be in writing before the deposit leaves
If you are about to place a first order and want the payment and inspection steps set out before you commit, send your item list and quantities to export@teakrootfurniture.com or WhatsApp +62 852 0600 7878. We reply with a quotation and a clear payment schedule in one working day.
If it is not in the order confirmation, it is not part of the deal. A first order should be confirmed against a document that covers, at minimum:
- Line-by-line specification: item, dimensions, quantity, wood finish, glass or base detail
- Unit prices and the trade term — FOB or CIF, named port
- Deposit percentage and the exact trigger for the balance
- Packing method and a load plan or loading sequence for your forwarder
- A production schedule with an estimated completion window
- Documents included in the price, and any charged separately
- Timber-legality and origin documentation for your market
- What happens if the schedule slips, and by how much before it becomes a problem
Two of those lines decide most later arguments. The first is the finish definition — "natural" means different things in different workshops, so pin it to a sample or a photographed reference. The second is the balance trigger. "Before shipment" is not a trigger; "after pack-out, against photographs and a packing list, before the container is sealed" is.
How the money can move — and who carries the risk
There is more than one way to pay, and the choice is really a choice about who holds the risk at each stage. The table below is the honest version of that trade-off.
| Method | Who carries the risk | Cost and formality | Fits best |
|---|---|---|---|
| T/T deposit + balance | Buyer trusts supplier between milestones | Lowest; bank fees only | A first mixed container |
| Letter of credit (L/C) | Bank, against documents | Highest; strict document discipline | Large or formal orders |
| Documentary collection (D/P) | Shared; documents against payment | Moderate | Repeat buyers who want more control |
| Escrow | Third party until conditions met | Rare here and usually expensive | Large, unfamiliar first orders |
For most first orders of a single container, deposit-plus-balance is the normal middle ground. An L/C is worth its cost only when the order is large enough, or the relationship new enough, that bank-mediated payment genuinely reduces risk. The mistake is using an L/C on a small order and then drowning in document discrepancies — a misspelt consignee name is enough to hold a payment.
Ready to price a container? Send us your item list and quantities, and we will confirm what fits in one load, the FOB Semarang price and a realistic lead time.
Send your item list for a quote →
The deposit structure, explained without the sales pitch
In this trade the common arrangement is a wire deposit of 50% to start production, with the balance due before shipment. It protects the manufacturer because raw teak root and workshop time are committed early; it protects the buyer because the goods do not leave the port of loading until the money has arrived, so you are never paying for a container that has already sailed. On a first order the production window is around twelve weeks, and the balance is typically settled once the goods are packed and inspected, just before loading.
The reason the balance sits before shipment rather than after arrival is not distrust of the buyer. It is that the supplier loses all control of the goods once they sail, while the buyer gains it. Settling before loading keeps the incentive on both sides aligned: inspected, photographed, listed — then paid.
Documents and the compliance test that now sits beside payment
For an EU buyer, the document set has two halves. The first is commercial: invoice, packing list, bill of lading, certificate of origin, and the phytosanitary and ISPM 15 treatment evidence that accompanies wood packing. The second half is what has changed.
Indonesia's SVLK timber-legality system became the VPA legality assurance system for exports to the EU in November 2016 (FLEGT IMM), and a FLEGT licence is issued against it by the Indonesian licensing authorities. For years, a FLEGT licence was the whole EU story for legal wood. It no longer is. Under the EUDR, a FLEGT licence proves legality but does not, by itself, prove deforestation-free origin. From 30 December 2026 a large or medium operator needs due-diligence evidence that the specific product is deforestation-free, supported by origin data. Confirm with your own competent authority how your file must be built, and ask your supplier for legality documents and plot-level origin data rather than one or the other.
Inspection: what to actually ask for on a mixed container
Inspection is what converts a promised order into a verified one, and on a mixed load it has to be more than a photograph of the container door. If the order holds a teak root dining table, a coffee table with a glass top, a root console, a bench and a run of stools, the inspection should confirm each line against the packing list — count, dimensions and finish — not just that something was loaded.
Three requests are reasonable on any first order, and a serious supplier will offer them before you ask:
- Photographs of the finished goods, item by item, before packing
- Photographs of the packed, loaded and sealed container at dispatch
- The option of an independent third-party inspection at pack-out, paid for by the buyer
The cleanest structure ties the balance to a point you control: pay the deposit to start, inspect when production finishes, then release the balance against the packed, photographed and listed shipment. Money follows evidence.
A milestone schedule you can put in the contract
Reduce the transaction to a short timeline both sides can point at. Something like this:
| Point | What happens | Money event |
|---|---|---|
| Week 0 | Specification, prices, trade term, payment terms confirmed in writing | Deposit invoice issued |
| Week 1 | Deposit received; materials and schedule confirmed by the workshop | 50% deposit paid |
| Weeks 1–10 | Production runs; progress photographs at agreed points | — |
| Week 11 | Goods finished; pre-packing photographs, optional third-party inspection | — |
| Week 12 | Packed and listed against the packing list; container loaded and sealed | Balance due before loading |
| After loading | Bill of lading issued; your broker clears and delivers | Landed cost settled at import |
An illustrative landed-cost build-up
Buyers who argue about FOB price without building the landed number often negotiate the wrong fight. The build-up below is an illustration only — plug in your own quote — but the shape is what matters. The two figures that are fixed by rule are the duty line and the VAT rate; everything else is commercial.
| Line | Illustrative amount | Note |
|---|---|---|
| FOB Semarang value | as invoiced | Your purchase price at the port of loading |
| Ocean freight + insurance | from your forwarder | Turns FOB into CIF |
| Import duty (HS Chapter 94) | 0% on most lines | Confirm the exact HS code with your broker |
| Import VAT (Netherlands) | 21% | Standard rate; usually reclaimable by a VAT-registered business |
| Terminal handling + brokerage | from your broker | Ask for an all-in clearing quote naming the port |
| Onward delivery | from your hauler | Add for a project site, not just a warehouse |
One practical Dutch note: the 21% on the VAT line is import VAT on goods, not the hotel VAT that made headlines in January. Businesses registered for Dutch VAT can normally reclaim import VAT, and many use an Article 23 licence to defer it to their periodic return rather than paying at the border. Whether that suits you is a question for your fiscal representative, not for your supplier.
Warning signs that a first order is going wrong
- A request for full payment upfront on a first order
- No written specification — only chat messages
- Refusal to provide a production schedule
- Reluctance about inspection or container photographs
- Bank account details that change late in the process
- A supplier who cannot explain when the balance is due and why
None of these are proof of bad faith on their own. Together, though, they describe an order with no structure — and an unstructured order is the one that ends up in dispute.
Inside Jepara: why a deposit is normal here
A 50% deposit is not a demand born of distrust; it is how a workshop in Jepara funds an order it has not yet earned on. Teak root is bought and sorted early, drying and seasoning take months, and skilled carvers are booked against production schedules. When a buyer commits a deposit, the workshop can commit timber and hands to that order instead of balancing three others informally.
Jepara's craft is generational — much of the shaping of a root into a dining table or a table base is still done by hand, by people who learned it from a parent — and the rainy season sets a physical limit on how fast roots can be dried and sanded. A supplier who respects that rhythm quotes twelve weeks, not six, and tells you the range honestly. Our four 40-foot containers a month, and more than 300 containers shipped since 2016, are the reason we can be specific about milestones: deposit to start, inspection at pack-out, balance before the container is loaded. The structure is not just finance; it is the same discipline that keeps the paperwork clean.
Frequently Asked Questions
Does importing teak root furniture into the Netherlands now attract the new 21% rate?
Not in the way the hotel VAT change works. The January 2026 rise from 9% to 21% applies to short-stay accommodation, not to goods. A furniture import pays Dutch import VAT at the standard 21% rate on the customs value, which a VAT-registered business can normally reclaim, and many Dutch importers hold an Article 23 licence to defer that VAT to their periodic return instead of paying at the border. Confirm the mechanics with your fiscal representative before the container lands.
Which Dutch port will my container clear through, and does it affect the order?
Rotterdam handles the overwhelming majority of container freight into the Netherlands, through the deep-sea terminals on the Maasvlakte, with Amsterdam and Moerdijk as smaller alternatives. Rotterdam World Gateway is mid-way through a €500 million expansion that adds a fourth deep-sea berth (Port of Rotterdam, 2026). The port choice affects the freight and handling line, not the factory schedule, so fix it early with your forwarder.
I have a FLEGT licence — is my teak EUDR-ready?
No, and this is the trap of 2026. A FLEGT licence, issued against Indonesia's SVLK system, proves the timber is legal. From 30 December 2026 the EU Deforestation Regulation additionally requires deforestation-free evidence and origin geolocation for large and medium operators; micro and small operators have until 30 June 2027. Ask your supplier for legality documents and plot-level origin data together, not one or the other.
Can I use a letter of credit instead of a deposit-and-balance transfer?
Yes. On larger or more formal orders an L/C reduces non-payment risk, but it adds bank cost and demands strict document discipline, because the bank pays only against a compliant document set. For a single mixed container, deposit-plus-balance is the normal middle ground.
Talk to us about your first order
Send your target items and quantities — we will tell you what fits in a container, what it costs FOB Semarang, and how long it takes. If you are still building the specification, say so; we would rather help you write it than quote against a guess.
Or write directly to export@teakrootfurniture.com · WhatsApp +62 852 0600 7878 · Mr. August Praymunor (10:00–16:00 Jakarta time, GMT+7)
Packing, loading and shipping
Every order leaves packed the same way it was specified. Pieces are wrapped for transit, stacked to a load plan that keeps weight and glass where they belong, and staged on the floor before loading. We check the packed goods against the packing list so that what arrives matches what was ordered, and we can hand your customs broker a container load plan and loading photographs before the doors close.
Where does the container actually leave from?
Semarang is the port. Blind shipments are not something we do — every piece is loaded, counted and inspected at our Jepara yard before the truck leaves for the terminal two hours away.
Our office and factory stand at the same address on every document we issue: Jl. RA Rukmini KM.02 Pekalongan RT.02/V, Tahunan, Jepara 59428, Central Java, Indonesia.
MOQ 1×20'FCL mixed · 4×40'FCL per month · 300+ containers shipped since 2016 · export@teakrootfurniture.com
SHARE THIS GUIDE
Written by
Mr. August Praymunor · Overseas Marketing Director
CV. Nusantara Sourcing Agent — manufacturer and exporter of teak root furniture in Jepara, Central Java, Indonesia. Over 300 containers shipped since 2016, loading 4 x 40 FCL per month.
export@teakrootfurniture.com · WhatsApp +62 852 0600 7878 · LinkedIn · Jl. RA Rukmini KM.02 Pekalongan RT.02/V, Tahunan, Jepara 59428, Central Java, Indonesia
See also
- Teak Root Furniture Export from Indonesia: A Practical Buyer Guide
- Teak Root Furniture Manufacturer in Indonesia: How to Choose the Right Partner
- Wholesale Teak Root Furniture for Importers and Distributors
- Our teak root furniture range
- Sourcing Teak Root Furniture for Kenya's Safari Lodges and Coastal Resorts
- Furnishing Gulf Hotels with Teak Root Furniture
- Teak Root Tables for Oman: Import Duty & Buyer Guide
- Teak Root Furniture Wholesale for US Importers and Designers
- Teakholz Esstische & Couchtische für Deutschland & Österreich
- Teakmøbler i teakrot for Norge | Spisebord & Sofabord fra Jepara
Model pages — price, CBM and container load
One page per model: size, packed volume, FOB Semarang price and how many fit in a 20ft container.
- Mawar Dining Table dia 200 cm — USD 650 · 2.43 CBM
- Oval root dining table 200 cm — USD 365 · 1.50 CBM
- Cabak Dining Table dia 150 cm — USD 340 · 1.80 CBM









0 comments:
Post a Comment