The duty figure most American importers still carry stopped being true on 24 July 2026: from that date Indonesian goods enter the United States with a 10% Section 301 forced-labor duty on top of a duty-free base rate, roughly USD 1,800 on an FOB order of USD 18,000. That amount belongs inside your quote rather than discovered at entry, which is why two quotes for the same container so often disagree.
Summary: Made in Jepara, Indonesia. FOB Semarang, one 20ft container with mixed models. Two calendar items to build in: ISF (10+2) must be filed before the vessel loads, so booking details need to reach you early; any shipment above USD 2,500 is a formal entry requiring a bond, so arrange the broker before the first container.
Last updated: 7 November 2026
The duty figure most American importers still carry for teak root furniture stopped being true on 24 July 2026. From that date, Indonesian goods enter the United States with a 10% Section 301 forced-labor duty on top of a duty-free base rate (Office of the US Trade Representative, 23 July 2026) — about USD 1,800 on an FOB order of USD 18,000, money that belongs inside your quote rather than discovered at entry.
Three tariff stories run at once, which is why two quotes for the same container disagree. Some buyers price 25% because they read about the timber tariffs; others assume the courts cancelled everything in February 2026. For anyone planning to import teak root furniture from Indonesia, the answer is narrower — and duty is the one line in a landed cost nobody can negotiate.
The July 2026 duty change that most teak root quotes still get wrong
Duty on a US entry is not one number but a stack of separate instruments, each of which has to be checked against the entry date. Here is what sits on a teak root dining table or console leaving Semarang in October 2026.
| Entry line | What it is | Rate that applies |
|---|---|---|
| HTS 9403.60.80 — base line | "Other wooden furniture", Column 1 general (MFN) rate | Free (USITC tariff schedule) |
| HTS 9903.05.45 — Section 301 | Forced-labor action covering 60 economies, Indonesia included; in force from 24 July 2026 | 10% of entered value |
| Section 232 — timber and lumber derivatives | 25% on certain upholstered wood furniture and on kitchen cabinets and vanities; the rise to 30% and 50% was postponed to 1 January 2027 (Sandler, Travis & Rosenberg, January 2026) | Not applicable to solid teak root tables, consoles, benches or planters |
| Merchandise processing fee (MPF) | Charged on formal entries | About 0.3464%, within annual minimum and maximum |
| Harbor maintenance fee (HMF) | Applies to vessel arrivals | 0.125% |
| Total duty on the goods | Before freight, brokerage and drayage | 10% |
Run it on a USD 10,000 entered value: USD 1,000 duty, USD 34.64 MPF, USD 12.50 HMF, a landed cost of USD 11,047.14 (entry dated 6 October 2026, licensed broker's tariff engine). The free base rate is genuine — the 10% is Chapter 99 additional duty, which is why buyers who look up HTS 9403.60.80, see "Free" and stop there under-budget by ten points. The United States also levies no import VAT, so there is no reclaimable tax layer; you meet state sales tax at resale instead.
Two side effects of 2026 catch people out. The USD 800 de minimis exemption is now suspended for all imports, so even a sample stool needs a formal entry. And the reciprocal country tariffs that briefly applied to Indonesia were struck down in February 2026 — any quote still listing them as a permanent line is out of date.
What American buyers are specifying in 2026
Demand has moved toward one-off statement pieces. Vogue's 2026 interiors review names aged woods and organic, unpolished forms among the defining looks of the year; trade forecasts describe an "organic luxe" direction built on honest grain and visible joinery. A teak root coffee table with a glass top fits that brief without an invented backstory.
Hospitality is the clearest pipeline. At the end of Q2 2026 the US hotel construction pipeline held 5,975 projects and 703,001 rooms, with 1,081 projects and 133,216 rooms under construction and 2,147 projects starting within twelve months (Lodging Econometrics, Q2 2026). Luxury hit a record 103 projects and 25,496 rooms, up 12% in projects and 21% in rooms year-on-year; conversions hit a record 1,567 projects and 152,044 rooms, and with renovations that is 2,097 projects and 255,834 rooms being refitted.
Conversions are the interesting half: the shell stays and the public areas are replaced — lobby, breakfast room, bar, terrace. That rewards a few large pieces rather than forty matching SKUs. A 120-room conversion typically needs about 8 to 12 teak root console and side tables, 6 to 10 teak root coffee tables with glass tops for lounge zones, 12 to 18 teak root stools or benches at the bar and entrance, and two or three oversized root sculptures or planters — a volume that fits one mixed 20'FCL alongside the dining tables. US imports of Indonesian "other furniture not specified elsewhere" reached USD 710.84 million in 2025 (UN Comtrade, via Trading Economics).
Ready to price a container? Send us your item list and quantities, and we will confirm what fits in one load, the FOB Semarang price and a realistic lead time.
Send your item list for a quote →
The landed-cost model worth building before you quote a client
Most RFQs ask for the FOB price and stop. Your client is asking what the room costs, which only lands when freight, duty and inland delivery sit on one sheet. Below is a planning model for a mixed 20'FCL loaded in Semarang and delivered into a Los Angeles warehouse — a model, not a quotation; the only legally fixed line is the duty.
| Line | Basis | Planning figure (USD) |
|---|---|---|
| FOB Semarang, mixed 20'FCL | Around 34 pieces: dining tables, consoles, coffee tables, stools | 18,000 |
| Ocean freight, Semarang to Los Angeles | 20'FCL; swings with season and carrier | 3,000 – 4,500 |
| Duty — Section 301 forced labor | 10% of entered value | 1,800 |
| MPF | 0.3464%, within annual caps | 62 |
| HMF | 0.125%, vessel arrival | 23 |
| Brokerage and ISF filing | Per entry | 150 – 250 |
| Drayage, port to warehouse | Los Angeles basin; varies by ZIP | 400 – 900 |
| Landed total | Mid-range of the variable lines | ~24,300 |
| Landed per piece | 34 pieces | ~715 |
For context: the Drewry World Container Index composite stood at USD 4,485 per 40ft on 15 October 2026, while published Jakarta to Savannah quotes start around USD 9,000 per 20' and USD 12,080 per 40'HC (Skypace, 2026). Two forwarders can differ by more than the duty in the same week — ask what is included.
One lever sits in your own hands: about a third of US buyers order table bases only and have glass or stone fabricated locally. That cuts cubic volume, removes the most breakage-prone item from the crossing, and often means a 20'FCL rather than a 40' on a first order.
Send your item list for a quote →
Ready to price a container? Send your item list and quantities, and we will confirm what fits in one load, the FOB Semarang price and a realistic lead time.
Documents that decide whether your container clears in days or weeks
The most common reason a furniture container sits at a US port is not duty but a paperwork gap that surfaces after the vessel sails, when nobody can fix it cheaply. Five items carry the shipment.
- Lacey Act declaration (PPQ Form 505). It names the species, the country of harvest and the quantity. Phase VII of the Lacey Act provisions began on 1 December 2024 and brought a wider set of plant and furniture lines into scope (USDA APHIS). Here the species is Tectona grandis and the country is Indonesia — our mill records and SVLK chain-of-custody papers are what your broker attaches to show due care.
- SVLK / V-Legal documents. Indonesian timber products, teak included, move under the national legality assurance system, and the V-Legal document travels with the shipment — evidence rather than assurance against the Lacey Act question.
- ISPM 15 wood packaging mark. Pallets, crates and dunnage must be heat treated to a core temperature of 56°C for at least 30 minutes and carry the IPPC stamp (US Customs and Border Protection). An unmarked pallet means a hold and a re-treatment bill; every export load we ship uses marked material.
- Commercial invoice and packing list. The list must be granular — item, dimensions, finish, quantity, carton — because it is what an inspector checks the goods against.
- Correct HTS classification. Solid teak root tables, consoles, benches and planters classify as wooden furniture — not timber, not upholstered product. That is what keeps you out of the Section 232 universe; a mis-declared entry can be assessed at 25% instead of 10%.
Two calendar items to build in: ISF (10+2) must be filed before the vessel loads, so booking details need to reach you early; any shipment above USD 2,500 is a formal entry requiring a bond, so arrange the broker before the first container.
Choosing a US port for a 20'FCL of mixed teak root
Port choice is not about which terminal is closest to Indonesia. It is about where the goods stop moving — which port puts the container nearest its final address at an inland cost you have confirmed.
| Port | Typical transit from Indonesia | Usually the right choice when |
|---|---|---|
| Los Angeles / Long Beach | Direct transpacific services run around 18–22 days; Asia–US West Coast services generally cluster at 20–30 days port to port (Dimerco, March 2026) | Delivery is west of the Rockies, or you can absorb a rail leg. September 2026 was the port's busiest month in 118 years at 1,042,652 TEUs (Port of Los Angeles, October 2026) — book chassis and drayage as soon as the vessel sails. |
| New York / New Jersey | US East Coast services typically 30–45 days port to port (Dimerco, March 2026) | You sell into Northeast retail and design trade. |
| Savannah | Published Jakarta–Savannah ranges span 32 to 71 days depending on routing (Skypace, 2026) | Distribution sits in the Southeast. Check the inland leg if you also deliver to Texas or the Midwest. |
| Houston and Gulf ports | Fewer direct Indonesia calls; expect transhipment | Texas, Louisiana or central US projects, where inland saving beats the extra sea time. |
Whichever port you choose, everything is checked against the packing list in Jepara before loading: catching a short-packed console in Jepara costs a phone call, catching it in Long Beach costs a claim. That is why loading photography stays in-house.
A first order that stays safe
First orders fail for boring reasons: a finish nobody wrote down, glass with the wrong edge profile, packing that cost 30% more than it needed to. The structure that removes those surprises:
- Start with one mixed 20'FCL. Our minimum is a single mixed 20'FCL — enough to test sell-through across dining tables, consoles, coffee tables and stools without tying up capital in a 40' guess. First orders start at one load, not a full season.
- Fix the finish on a sample, in writing. Natural, bleached, driftwood-grey and darker lacquer look different in a Long Beach showroom than in a Jepara workshop. Agree the reference before production, not after.
- Use the standard terms. 50% deposit, balance before shipment, FOB Semarang, roughly 12 weeks on a first order — our regular terms, and what makes a twelve-week promise keepable.
- Ask for the load plan before shipping. It shows how many pieces actually travel, how the weight sits, and what your broker works from.
- Come and look, or send someone. Factory inspection in Jepara is welcome — about two hours from the port of Semarang — and buyers who visit tend to order again with more confidence.
Where these pieces come from
Jepara, on the north coast of Central Java, Indonesia, has been a wood-carving town for centuries, and the teak root trade grew out of that skill base rather than replacing it. The raw material is not plantation timber cut for the purpose; it is the root ball left when mature teak is felled — dense, irregular, and until recently burned or left to rot. A teak root dining table begins as something nobody wanted and ends as the object a designer builds a room around.
The work is seasonal in ways a spreadsheet does not show. Teak root arrives with high moisture and must be dried slowly and evenly before it can hold a glass top flat; rush that stage in the wet season and the movement appears six months later in a Phoenix showroom. Sanding and finishing is hand work — a large root coffee table can pass through four pairs of hands before it is photographed. We run about 4×40'FCL per month from Jepara for importers, hotel groups and contractors in Europe and North America, and have shipped over 300 containers since 2016. The routine behind that matters more than the capacity.
DATA SHEET - FROM OUR FOB 2026 PRICE LIST
Models that leave the factory most often (FOB Semarang, delivery to Los Angeles / New York)
| Model | CBM/pc | FOB | Max pcs in one 20ft |
|---|---|---|---|
| Cabak Dining Table dia 100 cm | 0.75 | USD 195 | ~32 pcs |
| Cabak Dining Table dia 120 cm | 1.08 | USD 265 | ~22 pcs |
| Cabak Dining Table dia 150 cm | 1.8 | USD 340 | ~13 pcs |
| Mawar Dining Table dia 120 cm | 1.08 | USD 265 | ~22 pcs |
| Mawar Dining Table dia 150 cm | 1.69 | USD 340 | ~14 pcs |
| Mawar Dining Table dia 200 cm | 2.43 | USD 650 | ~9 pcs |
Max pcs = if the container carries that model only, using 24 CBM of usable space.
A worked mixed load - 24 pieces, 22.78 CBM, FOB USD 5,310
| Item | Qty | CBM | FOB |
|---|---|---|---|
| Cabak Dining 120 cm | 8 | 8.64 | USD 2,120 |
| Mawar Dining 150 cm | 6 | 10.14 | USD 2,040 |
| Izpo Coffee Table 100 cm | 10 | 4.00 | USD 1,150 |
Border cost for this load into the United States
| Goods, FOB Semarang | USD 5,310 |
| Ocean freight (example rate) | USD 1,900 |
| Insurance 0.5% | USD 36 |
| CIF value | USD 7,246 |
| Duty: per your tariff line (confirm with your broker) | not included |
| No federal VAT - state or local sales tax applies at destination | not included |
| Landed, before duty, broker and port fees | USD 7,246 |
Freight is an example rate, quoted per sailing. federal VAT (state sales tax applies) is the standard rate and is recoverable if you are registered. Duty depends on your tariff line and on the origin certificate; confirm both with your broker. Broker and port charges are set at destination and are not included. Product figures come from our FOB 2026 price list.
Frequently Asked Questions
What duty will I actually pay on teak root furniture from Indonesia in 2026?
On solid wooden furniture under HTS 9403.60.80 the base Column 1 rate is Free, and a 10% Section 301 forced-labor duty applies to Indonesian origin from 24 July 2026. Add about 0.47% in MPF and HMF on a vessel entry. Section 232 timber tariffs do not apply to solid, non-upholstered tables and consoles. Confirm your ten-digit line with a broker before promising a price.
Do I need a Lacey Act declaration for a container of teak root furniture?
Yes, for the covered furniture lines: PPQ Form 505, naming species, country of harvest and quantity — Tectona grandis, Indonesia. We supply mill documentation and SVLK chain-of-custody papers, so your broker files with evidence rather than assumption.
Which US port should I route a mixed container through?
Choose by inland destination, not ocean transit. Los Angeles and Long Beach suit the West and rail to the Midwest; New York/New Jersey and Savannah serve the East and Southeast; Houston suits Texas. Direct West Coast transit runs about 18–22 days against 30–45 days to the East Coast, but inland drayage usually decides the total.
Can you ship bases only so we fit glass and stone locally?
Yes — about a third of US buyers do. Bases use far less cubic volume, remove the most breakage-prone element from the crossing, and let the client specify the top. It often keeps a first order inside a 20'FCL instead of a 40'.
Talk to us about your project
Send your item list with sizes, finishes and quantities. We will reply with what fits one container, the FOB Semarang price, the packing plan and a realistic loading date. One email is enough to start; most quotations go out within one working day.
Request a quotation and mixed container plan →
You can also write to export@teakrootfurniture.com or message +62 852 0600 7878 on WhatsApp with your item list. First orders start at one mixed 20'FCL, and factory inspection in Jepara is welcome.
Packing, loading and shipping
Container loading in Jepara, Indonesia — wrapped, checked against the packing list and staged before dispatch.
Every piece is wrapped in single-face carton with edge protection, stacked to a written load plan and photographed before the doors close. We list each item on a packing list that matches the commercial invoice line by line, and we can send your customs broker a container load plan showing how the weight and volume are distributed. Glass and stone tops, when supplied from here, travel in separate timber-framed crates and are marked so the receiving warehouse knows not to stack on them.
Where does the container actually leave from?
It leaves through Semarang. Loading, the packing-list check and the dispatch photography all happen in Jepara, about two hours’ drive from the port on Java’s north coast, so nothing is presented to the shipping line that we have not inspected ourselves. From the quay the container is lifted on a regular liner service to Los Angeles, Long Beach, New York/New Jersey, Savannah or Houston, and FOB Semarang is the term we quote as standard. We have run this route repeatedly for US buyers, so the documents, the cut-offs and the timings are routine rather than experimental.
Our office and factory stand at the same address on every document we issue: Jl. RA Rukmini KM.02 Pekalongan RT.02/V, Tahunan, Jepara 59428, Central Java, Indonesia.
MOQ 1×20'FCL mixed · 4×40'FCL per month · 300+ containers shipped since 2016 · export@teakrootfurniture.com
Written by
Mr. August Praymunor — Overseas Marketing Director
CV. Nusantara Sourcing Agent · manufacturer and exporter of teak root furniture in Jepara, Central Java, Indonesia. We have shipped over 300 containers since 2016, loading 4×40’FCL per month for importers, hotel groups and interior contractors in Europe and North America. Every figure in this article comes from the sources noted in the text or from our own shipping records.
export@teakrootfurniture.com · WhatsApp +62 852 0600 7878 · LinkedIn · Jl. RA Rukmini KM.02 Pekalongan RT.02/V, Tahunan, Jepara 59428, Central Java, Indonesia
Buying coffee tables by the container? The teak root coffee table range with FOB prices, sizes and volume puts the numbers next to the models.
For a container of teak root dining tables, the price and volume table shows what fits and what it costs per piece.
See also
- Why French Buyers Choose Indonesian Teak Root Furniture
- Teak Root Furniture for the German Market: What Importers Need to Know
- Teak Root Accent and Bedside Tables: Bulk Supply for Buyers
- Our teak root furniture range
Model pages — price, CBM and container load
One page per model: size, packed volume, FOB Semarang price and how many fit in a 20ft container.
- Karang Coffee Table 140 x 70 cm — USD 155 · 0.39 CBM
- Coffee table live edge 120 x 80 cm — USD 145 · 0.38 CBM
- Java coffee table dia 120 cm — USD 138 · 0.58 CBM









0 comments:
Post a Comment