When importers lose money on teak root furniture from Indonesia, the loss almost never comes from the FOB price — it comes from a supplier who cannot repeat a finish, cannot produce legality papers on demand, or cannot load on the promised week. Since 14 October 2025 the United States applies Section 232 duties to timber and derivative products, and in the EU the EUDR applies to large and medium operators from 30 December 2026: supplier selection is now a compliance decision.
Summary: Made in Jepara, Indonesia. FOB Semarang, one 20ft container with mixed models. We ask for a 50% deposit to start and the balance before shipment, with a pre-shipment inspection and a container load plan approved before loading.
The cheapest quotation on your desk is rarely the cheapest container to open. When importers get hurt buying teak root furniture from Indonesia, the loss almost never comes from the FOB price — it comes from a supplier who cannot repeat a finish, cannot produce legality papers on demand, or cannot load on the week they promised.
Two rule changes have turned supplier selection into a compliance decision as much as a purchasing one. Since 14 October 2025 the United States applies Section 232 duties to imports of timber, lumber and their derivative products (Federal Register), and in the European Union the Deforestation Regulation (EUDR) applies to large and medium operators from 30 December 2026 (European Commission). Both put the burden of proof on the buyer — which means the factory you choose has to be able to feed it.
This is the checklist we would hand a buyer who is about to import teak root furniture from Indonesia for the first time, or who has been burned once. It covers what to verify before you send a deposit, how to read the real landed cost, which documents keep a container moving, the red flags that matter, and how these pieces are actually made in Jepara, Central Java, Indonesia.
Why the supplier you choose is now a compliance decision
Indonesia is not short of factories that will quote you. National furniture exports slipped from about USD 2.5 billion in 2022 to roughly USD 1.9 billion in 2023 (Business Indonesia, March 2025), and the industry association HIMKI has been targeting 8–12% annual export growth to recover the ground. When orders are tight, the pressure to cut corners rises with it — and the corners that get cut are usually invisible at the quotation stage.
Two things separate a producer from a broker. The first is SVLK, Indonesia's Timber Legality Verification System, which is legally required for timber exports and is recognised under the EU–Indonesia FLEGT VPA; timber moving with a FLEGT licence is treated as legally harvested for European due diligence (European Commission; WoodRisk country profile for Indonesia). A genuine factory has a V-Legal / SVLK number it can send you today. The second is physical: a workshop with its own drying space and its own loading crew, rather than a desk that forwards your order.
Why this matters to you is simple. If the wood cannot be documented as legal and deforestation-free, the container is your customs problem, not your supplier's. Legality is now part of the product.
What to verify before you send a deposit
Run these seven checks in writing before money moves. A supplier that answers all of them is one you can build a repeat programme with; one that dodges two or three is telling you how the order will go.
- Legal identity. Company name, business licence and a bank account in the same name. No payments to personal accounts.
- SVLK / V-Legal number — and, for EU orders, confirmation they can issue a FLEGT licence.
- Factory, not a trading desk. A workshop address you can find on a map, ideally matching or adjoining the shipping address on the invoice.
- Capacity in containers. How many 40'FCL they load each month. We load 4×40'FCL per month and have shipped 300+ containers since 2016 — ask for the equivalent figure and a reference.
- References from buyers in your own market, with permission to contact them.
- Third-party inspection accepted before packing, at your nominated inspector.
- Samples and a spec sheet. A finish sample and an agreed dimension/finish sheet, so a repeat order matches the first.
A serious factory will also tell you what it cannot do — which root sections are scarce, which finishes are slow in the rainy season — rather than promising everything.
Ready to price a container? Send us your item list and quantities, and we will confirm what fits in one load, the FOB Semarang price and a realistic lead time.
Send your item list for a quote →
The landed-cost maths most importers get wrong
The FOB price is the first line of a longer sum, and it is rarely the line that decides your margin. Freight is the volatile one. Xeneta's 5 June 2026 market average put Far East to US West Coast at USD 3,933 per FEU and Far East to US East Coast at USD 5,103 per FEU; by mid-August 2026 Asia–US East Coast spot rates had spiked toward USD 9,144 per FEU (Supply Chain Dive, 12 August 2026). That spread is why you quote a container per sailing, not per year.
| Line | Basis | What to watch |
|---|---|---|
| Goods | FOB Semarang | Confirm finish, packing and labels are included |
| Ocean freight | 1 × 20'FCL or 40'FCL to your port | Rates reset each month; quote per sailing |
| Insurance | 0.3–0.6% of CIF value | Cheap cover on breakable glass tops and stone |
| Import duty | By HS code and country | US now carries a Section 232 layer — confirm the code |
| VAT / GST | On the CIF-plus-duty value | Usually recoverable if you are VAT-registered |
| Terminal & handling | Port charges to your door | Allow for haulage if the port is not your city |
Duty is the line buyers misread most. For finished wooden furniture into the EU, the main line (HS 9403.60) sits at around 0% under the Common External Tariff, with VAT added at the local rate — confirm both with your broker. For the US it is murkier: the Section 232 timber action set 10% on softwood lumber, 25% on upholstered wooden furniture (rising to 30% on 1 January 2026) and 50% on kitchen cabinets and vanities, and reported covered codes include 9403.40.9060, 9403.60.8093 and 9403.91.0080 (Wiley, October 2025; RVIA, January 2026). Whether a specific teak root dining table sits inside the derivative list depends on its HTS classification — so get the code confirmed before you quote a landed price to your own customer.
Documents that keep an Indonesian container moving
Most delays we see are not about production. They are about a missing paper discovered at the port. Keep this list against every shipment.
| Document | What it proves | Who asks for it |
|---|---|---|
| SVLK / V-Legal | Legal harvest and chain of custody | Origin and destination customs |
| FLEGT licence | Legality recognised under the EU VPA | EU importer's EUDR file |
| Invoice & packing list | Value and exact contents | Customs and your broker |
| Bill of lading | Carriage contract and title | Bank, forwarder, customs |
| ISPM 15 stamp | Wood pallets/crates are treated | US, EU and Australia biosecurity |
| Lacey Act declaration | Species, country of harvest, quantity | US CBP (filed by the importer) |
| Fumigation certificate | Timber or packing treated to standard | Some destination ports |
Two of these catch importers out. The Lacey Act declaration is your filing, not ours — APHIS expects the scientific name (Tectona grandis), country of harvest, quantity and value for anything containing plant material (USDA APHIS). And ISPM 15 applies to the pallets and crates, not the furniture, which is why we carton pack in single-face cartons and use only stamped wood where a crate is needed. If you buy from Indonesia, budget time for the SVLK-to-EUDR overlap rather than discovering it in the week of sailing (Indonesia Business Post).
Red flags that cost buyers the most money
In our experience selling to Europe and North America since 2016, almost every dispute traces back to one of these, and they are visible before the order, not after:
- A price far below the market, offered with no SVLK number attached.
- No factory video, and an inspection request that meets resistance.
- Every item quoted instantly, without asking dimensions, finish or quantity.
- Pressure for full payment up front, or payment to a personal account.
- No answer to basic loadability questions — how many pieces fit a 20'FCL, what the container weighs.
- Product photos that turn up on several other suppliers' websites.
None of this is exotic. It is simply what a broker looks like when the order is small and the buyer is new.
Making a first order safe
A first order does not have to be large, and it should not be brave. Ours start at one 20-foot container with mixed items — a teak root dining table or two, a root coffee table with a glass top, a root console, a run of root stools or a bench, a root planter, sometimes a root sculpture as a feature. That gives you a full container at sea freight economics without committing to a full production run of a single item.
The structure we use is deliberately plain: a spec sheet agreed before production, 50% deposit to start, a pre-shipment inspection, a container load plan you approve, and the balance before shipment. The first order runs about 12 weeks in production, and a mixed container lets you test several lines — dining, coffee, console, seating — before you scale one.
Where these pieces come from
Our workshop sits in Jepara, on the north coast of Central Java, a town that has been carving teak since the nineteenth century. The raw material is the root mass of old plantation teak — the part the sawmill leaves behind — which is why every piece is one of a kind and why no two roots behave the same under the chisel. The scale is real: Jepara consumes between 1.5 and 2.2 million cubic metres of roundwood a year, and roughly 9 cubic metres sustains one full-time employee for a year (Roda, Atlas of the wooden furniture industry in Jepara).
The work is seasonal in ways a quotation never shows. In the rainy season roots dry more slowly, so a finish that takes days in July can take longer in January. Root sections are limited — a wide, stable dining base is harder to find than a console. Legality paperwork has to be produced for every batch. Juggling those three is what our 4×40'FCL-per-month rhythm and 300+ containers since 2016 are built on, and it is why we would rather move a delivery date than ship a root that will move in your showroom.
Frequently Asked Questions
How do I check that an Indonesian teak root supplier is a real factory, not a broker?
Ask for the SVLK / V-Legal number, the factory address (it should match or adjoin the shipping address on the invoice) and a short video from the workshop floor. A producer can supply all three the same day; a broker usually cannot. We are happy to host a factory visit in Jepara, Central Java.
Which documents protect me if customs stops the container?
For the EU, an SVLK / V-Legal certificate plus a FLEGT licence feeds your EUDR due-diligence statement. For the US, you file a Lacey Act declaration naming the species and country of harvest. Everywhere, the invoice, packing list and bill of lading must agree line for line, and any wooden crate or pallet must carry an ISPM 15 stamp.
Does Section 232 duty apply to teak root tables going into the United States?
Since 14 October 2025 the US applies Section 232 duties to timber, lumber and derivative wood products — 10% on softwood lumber and 25% on upholstered wooden furniture, rising on 1 January 2026. Whether a specific teak root table falls inside the derivative list depends on its HTS classification, so ask your broker to confirm the code before you commit to a landed price.
How long does a first order take, and how are payments structured?
A first order runs about 12 weeks in production. We ask for a 50% deposit to start and the balance before shipment, with a pre-shipment inspection and a container load plan approved before loading. The minimum is one 20-foot container, and mixed items are allowed.
The same checks matter wherever you import from. Buyers in these markets ask us about them most:
- Italy's hotels and yachts
- Cyprus, before the EUDR deadline
- Poland
- Egypt's new hotels
- South Africa's hotel build-out
- Kenya's safari lodges
- Saudi Arabia
- the United States
- Australia
Regional hubs: Europe · Middle East · Africa.
Talk to us about your project
Send your item list — pieces, sizes and quantities — and we will reply with what fits in one container, the FOB Semarang price and a realistic production timeline. One email is enough to start; we usually answer within one working day.
Or write directly to export@teakrootfurniture.com · WhatsApp +62 852 0600 7878 · Mr. August Praymunor (10:00–16:00 Jakarta time, GMT+7)
Packing, loading and shipping
Every order is packed with protective wrapping, stacked to a load plan and staged before it leaves the factory. Single-face carton is our standard, heavier crating is used where a buyer or a destination requires it, and we list each piece so that what arrives matches what was ordered. A container load plan can be supplied for your customs broker before loading.
Where does the container actually leave from?
Loading happens at our yard in Jepara, on Java's north coast, against a load plan you approve in advance. From there the truck run to the port of Semarang takes about two hours; the container is booked out of Semarang as the port of loading, checked against the packing list and lifted onto the vessel. Note that Tanjung Emas in Semarang saw yard pressure and feeder cancellations into early 2026 (Kuehne + Nagel, 22 January 2026), so we book earlier in the season and build a buffer into sailings rather than pass a surprise to you.
Our office and factory stand at the same address on every document we issue: Jl. RA Rukmini KM.02 Pekalongan RT.02/V, Tahunan, Jepara 59428, Central Java, Indonesia.
MOQ 1×20'FCL mixed · 4×40'FCL per month · 300+ containers shipped since 2016 · export@teakrootfurniture.com
Written by
Mr. August Praymunor — Overseas Marketing Director
CV. Nusantara Sourcing Agent · manufacturer and exporter of teak root furniture in Jepara, Central Java, Indonesia. We have shipped over 300 containers since 2016, loading 4×40’FCL per month for importers, hotel groups and interior contractors in Europe and North America. Every figure in this article comes from the sources noted in the text or from our own shipping records.
export@teakrootfurniture.com · WhatsApp +62 852 0600 7878 · LinkedIn · Jl. RA Rukmini KM.02 Pekalongan RT.02/V, Tahunan, Jepara 59428, Central Java, Indonesia
See also
- How to Choose a Teak Root Furniture Manufacturer in Indonesia
- Teak Root Furniture for Spain: Sourcing for Hospitality and Retail
- Teak Root Furniture Wholesale for Belgian Importers
- Our teak root furniture range
Model pages — price, CBM and container load
One page per model: size, packed volume, FOB Semarang price and how many fit in a 20ft container.
- Karang Coffee Table 140 x 70 cm — USD 155 · 0.39 CBM
- Coffee table live edge 120 x 80 cm — USD 145 · 0.38 CBM
- Java coffee table dia 120 cm — USD 138 · 0.58 CBM









0 comments:
Post a Comment