FACTORY DIRECTOEM & CUSTOMEXPORT READYMIXED CONTAINER
300+Containers Shipped Since 2016
4 x 40'FCLMonthly Capacity
1 x 20'FCLMinimum Mixed Container
12 WeeksTypical Lead Time
Manufacturer & Exporter of Teak Root Furniture · Established 2016 · Jepara, Indonesia · Shipping Worldwide
Teak Root Furniture Manufacturer for European Importers

Teak Root Furniture Manufacturer for European Importers

Handcrafted teak root furniture from Jepara, Indonesia. Indoor and outdoor collections for wholesale and export buyers.

Sculptural Teak Root Dining Tables

Sculptural Teak Root Dining Tables

Solid teak root and glass-top dining tables, produced to order and prepared for container shipment.

Organic Coffee and Side Tables

Organic Coffee and Side Tables

Natural root-base coffee and side tables — statement pieces for retail and interior projects.

Wholesale and Custom Production

Wholesale and Custom Production

Custom and OEM production for importers, retailers and hospitality projects worldwide.

Request Our Catalogue and Price List

Request Our Catalogue and Price List

Send us your target items and quantities — our team will prepare a quotation for you.

Friday, November 20, 2026

Round, Oval or Rectangular Teak Root Tables: What Fits a Room

In the third quarter of 2026 there were 5,901 hotel projects and 692,999 rooms in the United States construction pipeline, plus 525 renovation projects covering 105,365 rooms (Lodging Econometrics, U.S. Hotel Construction Pipeline Trend Report, October 2026). Every one will fit out a breakfast room, a lobby and at least one bar. In a single hotel the table-shape decision is repeated thirty or forty times, and it is usually made once, on an FF&E schedule, by someone who has never loaded a container.

Summary: Round, oval and rectangular teak root tables answer three different room problems: round seats the most people per square metre, oval seats eight to ten in a long room, and rectangular suits banquettes and walls. Packed volume runs 0.95 CBM at Ø100 cm to 2.43 CBM at the 200 cm oval, which is 9–23 pieces per 20ft container. Prices are FOB Semarang, production 12 weeks.

That is where the money goes wrong. The three shapes use the same material and roughly the same labour, but they do not cost the same to ship, seat the same number of people per square metre, or pass through the same gap between banquette and wall. Since 28 July 2026 goods from Indonesia entering the United States also carry an additional 10% Section 301 duty (USTR, 23 July 2026), and from 30 December 2026 EU buyers must hold due-diligence data for the wood they import (Regulation (EU) 2025/2650). Shape now touches cost twice: in freight, and in compliance.

Teak root dining table with a natural root base, Jepara, Indonesia

A single-root teak root dining table before crating. The base decides which top shapes are possible, not the other way round.

The short answer: round seats the most people per square metre and ships cheapest per seat; oval solves a long, narrow room but needs a two-root or branch-leg base; rectangular suits banquettes and walls but needs a frame under the top that the buyer never sees. A 120 cm round takes 1.08 CBM, a 200 cm oval takes 2.43 CBM — 22 pieces against 9 in a 20ft container.

The 60 cm rule: what each diameter actually seats

Allow 60 cm of table edge per person at a round top — 24 inches if your drawings are in feet. Almost every seating argument we have with a buyer comes back to that number. A Ø100 cm top gives four people 78 cm each. A Ø120 cm gives four people 94 cm, or six at 63 cm, which is where armchairs stop working. A Ø150 cm seats six comfortably and eight only with narrow chairs. A Ø180 cm seats eight with room to serve.

US banquet suppliers quote the same geometry in inches: a 60-inch round is listed at six to eight seats, a 72-inch at ten (Seatplan seating guide, 2026). The range exists because the chair decides the upper figure. If a hotel specifies armchairs, read the lower number.

A restaurant that pushes two-tops together should standardise on Ø120 cm: two of them make a 240 cm run that seats eight without a gap in the middle.

Oval: the long-room answer, and the base it demands

A 200 × 100 cm oval seats eight at 60 cm per cover, ten if the ends are used, and it fits a room where a 200 cm round would leave no walkway. That is its whole case — and the hardest of the three to build honestly, because a natural root carries load where the wood is, not where the drawing wants it.

Up to about 180 cm an oval can sit on one wide root. At 200 cm we build with two roots or branch legs that reach toward both ends, and we load the ends before the glass is cut. A single compact root under a 200 cm top looks correct in a photograph and flexes the moment someone leans on the end; the glass rings first, then the finish cracks at the joint. If a supplier quotes a 200 cm oval on a single small base at a price close to a round, that is why.

Glass thickness follows the unsupported span: 10 mm tempered at 200 cm, 12 mm where the base is single-root or the top is meant for restaurant use. The glass top sizes and CBM guide sets out the same logic for coffee tables.

Rectangular: corners do the work, and a frame nobody sees

A rectangular top puts load on four corners, where a root has the least material. The fix is invisible: a hardwood frame under the top, screwed into the base, spreading load back toward the centre. Buyers never see it on a sample, and it is the first thing a cheap factory leaves out.

Rectangular earns its place against a wall or a banquette, where one long side is fixed, and the depth can drop to 80 cm. A 180 × 90 cm top seats six with armchairs once you allow 60 cm per seat plus 10 cm between chairs; eight only with armless chairs pulled tight. For a banquette run, specify 120 cm modules rather than one 240 cm piece: at that length staff drag it instead of lifting it.

Send your item list for a quote →

Ready to price a container? Send the diameters and quantities you are considering, and we will confirm what fits in one load, the FOB Semarang price and a realistic lead time — including which shapes have to be built in pairs to keep the base stable.

Clearances decide more projects than style does

By the time a shape reaches a quotation, the room has usually decided it. These are the numbers we use on load plans; only the accessibility figure is a legal minimum.

DimensionMetricImperialWhy it matters
Table edge to wall90 cm36 inChair pulls out and a person walks behind
Service route behind seating110 cm44 inTray carried past an occupied chair
Accessible route91 cm36 inMinimum clear width under ADA Standards (2010), 403.5.1
Between two tables60 cm24 inBack-to-back chairs, no squeeze
Dining height75 cm29.5 inStandard chair seat at 45 cm

A 4 m × 3 m breakfast room with a 90 cm ring leaves a 2.2 m × 1.2 m core: one Ø120 cm round, not two. The same room with a fixed banquette and three 120 × 80 cm rectangles seats twelve. Neither answer is better in general; one is better in that room.

The container maths: same seats, different freight

Freight is charged on volume, not seats, which is why shape is also a purchasing decision. Our loading records put a 20ft at about 28 CBM packed and a 40ft High Cube at about 65 CBM. We plan to 85% of that, because crates are not liquid: 23.8 CBM in a 20ft, 55 CBM in a 40HC.

Shape and sizeSeatsCBM eachPieces per 20ftSeats per 20ft
Round Ø120 cm41.082288
Round Ø150 cm61.801378
Oval 200 × 100 cm82.43972
Rectangular 180 × 90 cm61.601484

Our workshop measurements, crate included, planned at 85% fill. Your mix of consoles, stools and planters will change the final count.

The gap between the first row and the third is 22% more seating for the same ocean freight — an argument a hotel owner understands faster than a mood board. A long dining room that would otherwise seat six at a 150 cm round is a good reason; a vague preference for curves is not.

Mixing shapes in one load is normal. On a 40HC, ovals go against the wall first, because their crates are long and flat, and the square gaps take rounds, benches and consoles. We build that load plan before quoting, so the FOB price reflects the real fill. The cost breakdown of a 20ft load shows what freight and duty do to the unit price.

Three dates that change the landed cost in 2026 and 2027

28 July 2026 — United States. USTR imposed an additional 10% Section 301 tariff on imports from Indonesia under its forced-labour investigation (USTR final action, 23 July 2026). Wooden furniture under HTS 9403.60.80 still enters duty-free under Column 1, so the working figure for a teak root table is 0% plus 10%, on top of the merchandise processing fee of 0.3464% of value, which is subject to an annual minimum and maximum. There is no federal VAT; sales tax is collected at retail.

14 October 2025, still working through contracts — Section 232. The timber proclamation of 29 September 2025 put 10% on softwood lumber and timber, 25% on upholstered furniture, and 25% on kitchen cabinets and vanities from 14 October 2025; the upholstered rate rose to 30% on 1 January 2026. A teak root table is not upholstered, so it does not sit in that line, but put the classification question to your broker in writing. Buyers who assumed all wooden furniture was caught, and those who assumed none of it was, have both been surprised this year.

30 December 2026 — European Union. The EU Deforestation Regulation applies to large and medium operators from 30 December 2026, and to micro and small operators from 30 June 2027 (Regulation (EU) 2025/2650). A container reaching Rotterdam in January 2027 needs a due-diligence statement with plot-level geolocation for the wood. Ask now whether your supplier can produce that per shipment, not per year: it is the difference between a document and an alibi.

MarketTariff on wooden tables (2026)Tax at importExtra paperworkPorts we load to
United States0% Column 1 + 10% Section 301No federal VAT; state sales tax at retailISPM 15 stamp, invoice, packing listLos Angeles, Savannah, Newark
EU (Germany example)0% MFN on 9403.60 — confirm your CN line19% import VAT (21% NL, 20% FR)EUDR due diligence from 30 Dec 2026Rotterdam, Hamburg, Antwerp
United Kingdom0% under the UK Global Tariff20% VATUKTR due diligence, ISPM 15 stampFelixstowe, Southampton

Rates checked against USTR, EU and HMRC material in November 2026. Tariff lines change; confirm the 10-digit code with your broker before you price a programme.

A 40-room boutique hotel, priced by shape

Here is the arithmetic we run when a developer asks which shape to standardise on. Take 40 keys, 70% breakfast uptake and a 26-cover peak: seven Ø120 cm rounds plus one spare, 8.6 CBM. Six root coffee tables in the lobby at 0.5 CBM add 3 CBM; four poseur tables at 0.7 CBM add 2.8 CBM; twelve stools at 0.22 CBM add 2.6 CBM.

Total: about 17 CBM, which fits a 20ft with roughly 7 CBM left for consoles, planters and benches — the leftover that turns a furnished room into a finished one. Swap the eight rounds for six 200 cm ovals and seating drops to 48 covers while the dining volume rises to 14.6 CBM. In a 6 m room that is the right trade; in a square room it is a mistake you pay for twice.

Teak root dining table and stool set for a hotel breakfast room, made in Jepara, Indonesia

Table-and-stool set packed together; stools fill the gaps between crates.

Why the shape gets decided in Jepara, Indonesia

Teak root is a by-product of plantation clearing in Java, and the pieces that become tables are selected by eye, not by specification. Our workshop sits in Jepara, Central Java, the carving town on Java's north coast, where the same families have worked wood for generations. A root that will carry a 200 cm oval has to be wide and stable at the base; one for a Ø120 cm round can be taller and narrower. That judgement comes before any drawing is approved, which is why we ask for the room plan and not only a photo.

Drying is the part buyers underestimate. The rainy season from November to March slows air drying, so roots go to the kiln and are checked to 8–12% moisture before machining; a table finished at 18% will open a joint within one winter. Our record: 300+ containers since 2016, about 4×40’FCL a month. If you are planning to import teak root furniture from Indonesia for the first time, the shape conversation is the right place to start: it is the cheapest decision to change and the most expensive to get wrong.

Request FOB prices and a load planBuild a container load →

Frequently asked questions

Can one 20ft container mix round, oval and rectangular tables?

Yes. Our minimum is one 20ft mixed, no minimum per model, planned to about 28 CBM packed: typically 10–14 rounds, 4–6 ovals, 10–20 coffee or side tables and the stools that fill the gaps.

Which shape is cheapest per seat once freight is included?

Round. A 20ft of Ø120 cm rounds carries about 88 covers; the same container of 200 cm ovals carries about 72. That is roughly 22% more seating for the same freight, before duty.

How far ahead should a US buyer order for a 2028 opening?

Allow about 12 weeks for a first order, four to six weeks of ocean transit to the West Coast and two to three weeks for port release and inland delivery: place the purchase order five months before installation. For a venue needed before the Los Angeles Games, which run 14–30 July 2028 (Olympics.com), that means late 2027.

Does the 10% US Section 301 duty apply to orders placed before July 2026?

It applies to goods entered for consumption on or after 28 July 2026 (USTR, 23 July 2026). An earlier invoice does not exempt a container that clears later, so check the entry date your broker expects before fixing a retail price.

Talk to us about your project

Send the room plan, the diameters you are considering and the quantities, and you will get a written answer on what fits in one container, the FOB Semarang price per piece and a lead time we can hold. If you are choosing between shapes, say so: we will price both, so the difference is visible instead of argued.

Send your item list for a quote →

Packing, loading and shipping

Container being loaded with packed teak root furniture in Jepara, Indonesia

Every top and base is wrapped in single-face carton with corner protection, and glass is crated separately with edge foam so it never rests against a root. Each crate is numbered against the packing list, and the stack plan is drawn before loading: rounds stand on edge in pairs, ovals lie flat two high, bases are braced so nothing shifts in handling. The load plan goes to your broker before the container leaves, so documents and physical load agree.

Where does the container actually leave from? Loading happens at our workshop in Jepara, Central Java, Indonesia, on the island's north coast. The truck run to Semarang port is 65–70 km, about two hours; the load is checked against the packing list, driven to the terminal and lifted onto the vessel the same week. FOB Semarang is our standard term: our responsibility ends when the container is on board.

Our office and factory stand at the same address on every document we issue: Jl. RA Rukmini KM.02 Pekalongan RT.02/V, Tahunan, Jepara 59428, Central Java, Indonesia. Buyers are welcome to inspect a load before it ships: tell us two weeks ahead.

MOQ 1×20’FCL mixed · 4×40’FCL per month · 300+ containers shipped since 2016 · export@teakrootfurniture.com

Do you provide sourcing-agent services or factory visits?

We manufacture and export our own furniture from Jepara. We do not run a sourcing-agency service — no daily fee, no commission and no multi-supplier factory tours. Buyers are welcome to visit our workshop. For products outside our lines, we can consolidate with other suppliers into one shipment.

Share this page:

Written by

Mr. August Praymunor — Overseas Marketing Director

CV. Nusantara Sourcing Agent · manufacturer and exporter of teak root furniture in Jepara, Central Java, Indonesia. We have shipped over 300 containers since 2016, loading 4×40’FCL per month for importers, hotel groups and interior contractors.

export@teakrootfurniture.com · WhatsApp +62 852 0600 7878 · LinkedIn · Jl. RA Rukmini KM.02 Pekalongan RT.02/V, Tahunan, Jepara 59428, Central Java, Indonesia

See also

Teak Root Dining Tables: 100, 120, 150 and 200 cm Compared

Diameter is the first question a dining table buyer asks, and the answer decides the room, the price and the container. The same root series at 100, 120, 150 and 200 cm behaves like four different products.

Summary: Teak root dining tables from Jepara: 100 cm seats 4 (0.95–1.08 CBM), 120 cm seats 4–6 (1.08 CBM), 150 cm seats 6–8 (1.69–1.80 CBM) and 200 cm oval seats 8–10 (2.43 CBM). That is 20, 22, 13 and 10 pieces per 20ft container at 22 CBM usable. FOB USD 255–650, production 12 weeks.

Teak root dining table with glass top, Jepara
Teak root table collection, Jepara workshop

Seats, clearance and the room it needs

DiameterSeatsRoom neededBest for
100 cm42.8 × 2.8 mApartments, breakfast corners
120 cm4–63.0 × 3.0 mFamily dining, villas
150 cm6–83.3 × 3.3 mRestaurants, larger villas
200 cm oval8–103.8 × 3.2 mHotel suites, boardrooms

Multiply the seats by 60 cm of width and add a 90 cm circulation ring around the table — that is the space a designer will insist on. If a buyer says the table does not fit, the answer is usually a smaller diameter, not a smaller chair.

What changes as the diameter grows

Stability. A 100 cm top can sit on a compact root. A 150 cm top needs a base whose footprint reaches at least 55% of the top diameter, otherwise a lean on the edge tips it. At 200 cm we use a wider spread base or a double-root structure.

Glass. 8 mm is fine to 100 cm; from 120 cm upward we fit 10 mm, and 12 mm on the 200 cm oval. The bigger the top, the more the glass is doing structurally rather than just visually.

Weight and handling. A 200 cm root table is a two-person lift for four people. For hotel projects, ask who will move it and whether service lifts accept the crate dimensions before you confirm the order.

Dining table models: volume and FOB

ModelSizeCBM/pcFOB/pc
Cabak Teak Root Dining Table 120 cm120 cm1.080USD 265
Oval root dining table 200 cm200 cm1.500USD 365
Teak Branch Dining Table Ø 100 cmØ 100 cm0.750USD 145
Mawar Dining Table Ø 100 cmØ 100 cm0.750USD 195
Cabak Dining Table Ø 100 cmØ 100 cm0.750USD 195
Dining Table Panggang Ø 100 cmØ 100 cm0.750USD 205
Dining Table Ringin Ø 100 cmØ 100 cm0.750USD 205
Dining Table Asem Ø 100 cmØ 100 cm0.750USD 205

FOB Semarang, 2026 list. Packed volume measured after finishing.

Container maths: why the mix matters

Thirteen pieces of 150 cm in a 20ft is a good load, but it is also a narrow offer: one size, one look. Ten pieces of 200 cm is only 24 CBM at best and leaves little room for chairs. The most efficient first container we build for importers carries eight 120 cm tables, six 150 cm tables and ten coffee tables — 22.78 CBM, 24 pieces, a mix a retailer can actually display.

The base decides whether the table is stable

Two tables can have the same 150 cm top and behave completely differently, because the root underneath is not the same shape. What we check before production:

Base typeFootprintWorks up toNote
Single compact root45–55 cmØ 100–120 cmCheapest, lightest, easiest to load
Single wide root60–75 cmØ 120–150 cmMost of our dining tables
Wide root with branch legs75–90 cmØ 150–180 cmLegs are structural, not decorative
Double roottwo footprintsØ 200 cm ovalHeavier crate, needs a wider container slot

The test is simple and we do it on every piece: put the finished base on a flat floor, lean on the edge with both hands, and look for lift on the opposite side. If it lifts, the base is too small for that top — no amount of glass thickness fixes it.

Room layouts: three that come up constantly

Villa, six seats. Ø150 cm round, 3.3 × 3.3 m clear, chairs with arms. One table fills the container slot inefficiently, so we quote it with two 120 cm tables for the terrace.

Restaurant, repeated seating. Ø120 cm round. Twelve to fourteen tables per 20ft, all the same size, because a restaurant wants identical covers and a service team that never has to think about which table seats how many.

Hotel suite or boardroom. 200 cm oval with 10 chairs. The oval lets people see each other across the table without a head-and-foot hierarchy, which is exactly why boardrooms choose it.

Delivery, assembly and what the crate weighs

A dining table ships as two units: base and glass. That is deliberate — it makes the piece carryable through a normal doorway and it protects the glass. On arrival the base is levelled on its pads, the glass is placed, and the four silicone pads are checked by hand.

For project buyers, plan the lift: a 200 cm piece is a three-person item and the crate will not pass a service lift under 1.1 m opening. If the destination is a finished hotel, confirm access before production, not after the container lands.

Request FOB prices and a load planBuild a container load →

Frequently asked questions

How many people does a 150 cm teak root table seat?

Six comfortably, eight if the chairs are armless and the room allows a 90 cm circulation ring.

Can you make a 180 cm or 220 cm diameter?

Yes. Anything above 200 cm is made to order with a wider base, and we confirm the glass thickness and crate dimensions before production.

Is a round table better than rectangular for a restaurant?

Round seats more people per square metre and has no corner disputes; rectangular suits banquettes and long walls. Most restaurants we ship to order round 120 cm and 150 cm.

What is the lead time for a container of dining tables?

Twelve weeks from deposit for a mixed container, or eight to ten weeks if the schedule allows.

Written by

Mr. August Praymunor — Overseas Marketing Director

CV. Nusantara Sourcing Agent · manufacturer and exporter of teak root furniture in Jepara, Central Java, Indonesia. We have shipped over 300 containers since 2016, loading 4×40’FCL per month for importers, hotel groups and interior contractors.

export@teakrootfurniture.com · WhatsApp +62 852 0600 7878 · LinkedIn · Jl. RA Rukmini KM.02 Pekalongan RT.02/V, Tahunan, Jepara 59428, Central Java, Indonesia

Do you provide sourcing-agent services or factory visits?

We manufacture and export our own furniture from Jepara. We do not run a sourcing-agency service — no daily fee, no commission and no multi-supplier factory tours. Buyers are welcome to visit our workshop. For products outside our lines, we can consolidate with other suppliers into one shipment.

Share this page:

Teak Root Coffee Tables with Glass Tops: Sizes, Thickness, CBM

A glass top is what turns a teak root base into a table a buyer can actually use. The base is a sculpture; the glass is the surface. Get the thickness and the overhang right and the piece sells. Get them wrong and the first container comes back as a complaint.

Summary: Teak root coffee tables from Jepara ship with tempered glass from 8 mm at Ø100 cm to 10 mm above 120 cm, and 12 mm where the top overhangs the base by more than 8 cm. Packed volume runs 0.20–0.60 CBM per piece, FOB USD 110–195, and a 20ft container carries about 40–100 pieces depending on diameter. Prices are FOB Semarang; production 12 weeks.

Teak root coffee table with glass top, Jepara
Export packing of teak root tables, Jepara

Why the top is glass and not wood

A teak root base is never flat. It rises, twists and finishes at an uneven height, and every piece is different. Sanding a root until it is flat destroys the shape that made it worth buying. Glass solves this: it sits on three or four small silicone pads, follows the highest points, and leaves the root visible underneath.

That is also why the top is usually clear rather than smoked or frosted. The buyer is paying for the root; the glass should disappear. In hotel projects we see more bronze and grey tint, because the room has a colour scheme to respect.

Thickness by diameter: the rule we build to

Top diameterGlassWhy
80–100 cm8 mm temperedShort span, light use
120 cm8 mm normal use, 10 mm for hotelsTraffic and cleaning pressure
150 cm10 mmWider unsupported span
Above 150 cm or overhang > 8 cm12 mmDeflection and edge risk

Two details matter as much as thickness. The edge should be flat-polished, not bevelled, because a bevel catches light and shows every chip. And on tables that will travel by sea, the glass should be crated separately, never laid on the root inside the carton.

Overhang: where tables fail in the container

The top should overhang the widest point of the base by 4–8 cm per side. Less looks mean; more puts a lever arm on the glass and a tipping risk on the piece. On an oval base the overhang must be measured at the widest point, not the average — this is the most common specification mistake we correct before production.

Coffee table models, packed volume and price

ModelSizeCBM/pcFOB/pc
Mawar Coffee Table 100 cm100 cm0.450USD 115
Yava Coffee Table 100 x 100 cm100 × 100 cm0.400USD 115
Karang Coffee Table 100 x 50 cm100 × 50 cm0.200USD 115
Coffee Table 100 x 50 cm100 × 50 cm0.200USD 125
Coffee Table live edge 100 x 60 cm100 × 60 cm0.240USD 125
Mawar Coffee Table 120 cm120 cm0.650USD 135
Lemma Coffee Table 120 x 120 cm120 × 120 cm0.400USD 110
Bajo Coffee Table 120 x 120 cm120 × 120 cm0.580USD 125
Yava Coffee Table 120 x 120 cm120 × 120 cm0.580USD 125
Coffee Table 120 x 60 cm120 × 60 cm0.290USD 135

FOB Semarang, 2026 list. Packed volume measured after finishing.

Notice how little volume separates a 100 cm from a 120 cm model — but how much the price moves. That gap is the commercial decision your buyer is making, not the design.

Container maths for coffee tables

Coffee tables are the cheapest volume in the collection. At 0.20–0.40 CBM each, a 20ft container at 22 CBM usable carries 55 to 100 pieces. That is why first orders usually mix coffee tables with dining tables: the coffee tables fill the gaps around the bigger pieces, and the average freight per piece drops.

Where glass breaks in transit, and what we changed

Glass does not usually break in the container. It breaks in the last 200 metres — at the warehouse, on a pallet truck, or when the showroom assistant slides the top off the crate alone. Three changes cut our breakage rate to almost nothing:

  • The top travels vertically. A glass disc laid flat at the bottom of a container carries the weight of everything above it. Standing on edge, in its own crate, it carries nothing.
  • Edge protection before wrapping. Foam on the rim, then cardboard, then the crate. Wrapping first and padding later is what chips the edge.
  • Two-person handling is printed on the crate. Not because buyers ignore it, but because it gives the receiving team the authority to refuse a one-person lift.

If a top does arrive damaged, photograph the crate before opening it. Every claim we have resolved quickly started with a photo of the intact crate, not of the broken glass.

Maintenance instructions the hotel needs

Hotels ask for a care sheet more often than they ask for a discount. What actually matters on a glass-topped root table:

IssueCauseWhat to do
Rings and hazeHard water, glass cleaner with ammoniaDamp microfibre, then dry with a second cloth. No ammonia.
ScratchesGrit dragged across the topFelt pads under everything. Deeper marks are polished, not hidden.
MovementSilicone pads compressed or missingReplace pads yearly. We ship a spare set with every container.
WobbleUneven floor, not an uneven rootLevelling shims under the base before touching the glass.

When a wood top is the better answer

Glass is not always right. A wood top — solid teak planks, or a resin-filled root — is the better choice when the piece is going into a space where children climb on furniture, where the client wants no reflections in photographs, or where the table will be used as a working surface. Wood is also cheaper to ship: no separate crate, no glass weight, and a smaller packed volume.

The trade-off is visual. The root disappears under a solid top. If the buyer is paying for the sculpture, keep the glass.

Five specification mistakes we correct every month

  1. Top wider than the base can hold. Over 8 cm of overhang per side and the piece becomes a lever.
  2. 8 mm glass on a 150 cm top. It will not break in the showroom; it will flex in the hotel.
  3. Bevel edge instead of flat polish. Bevels catch light and show chips.
  4. Glass shipped inside the same carton as the base. The cheapest saving in the quotation, the most expensive in claims.
  5. No spare pads. A 40-cent part that decides whether the table wobbles two years later.

Request FOB prices and a load planBuild a container load →

Frequently asked questions

Is tempered glass included in the FOB price?

Yes. Prices quoted are for the complete piece: root base plus tempered glass top, packed and ready for export.

Can we supply our own glass in the destination country?

Yes, and some importers do it to save freight. We then ship the base only and provide the exact top dimensions and pad positions.

What glass thickness should I order for a hotel lobby?

10 mm from 120 cm upward. In high-traffic areas we also recommend polished edges and a maintenance instruction sheet for the housekeeping team.

How is the glass protected during shipping?

It is crated separately inside the container, edge-protected, and never stacked under other cartons.

Written by

Mr. August Praymunor — Overseas Marketing Director

CV. Nusantara Sourcing Agent · manufacturer and exporter of teak root furniture in Jepara, Central Java, Indonesia. We have shipped over 300 containers since 2016, loading 4×40’FCL per month for importers, hotel groups and interior contractors.

export@teakrootfurniture.com · WhatsApp +62 852 0600 7878 · LinkedIn · Jl. RA Rukmini KM.02 Pekalongan RT.02/V, Tahunan, Jepara 59428, Central Java, Indonesia

Do you provide sourcing-agent services or factory visits?

We manufacture and export our own furniture from Jepara. We do not run a sourcing-agency service — no daily fee, no commission and no multi-supplier factory tours. Buyers are welcome to visit our workshop. For products outside our lines, we can consolidate with other suppliers into one shipment.

Share this page:

What a 20ft Container of Teak Root Furniture Actually Costs

Summary: A mixed 20ft container of teak root furniture — 24 pieces across three models — leaves Semarang at about USD 5,310 FOB, lands in Rotterdam at roughly USD 8,480 including 21% Dutch VAT, and works out to about USD 353 per piece landed, with VAT recoverable. Usable space is 24 CBM of a 28 CBM container, and production takes 12 weeks.

Most first-time buyers ask for a price list and get a single number per model. That number is the least useful part of the decision. What actually decides whether an order makes money is the relationship between price, packed volume, and what the container can carry — and that relationship is not obvious until you build one.

Export packing of teak root furniture, Jepara
Container loading plan for teak root furniture by CBM

The container, piece by piece

Here is a real mixed load we quote often — three models, chosen because they sell in the same rooms:

ModelSizeCBM/pcFOB/pcQtyFOB total
Cabak dining tableØ 120 cm1.08USD 2658USD 2,120
Mawar dining tableØ 150 cm1.69USD 3406USD 2,040
Izpo coffee tableØ 100 cm0.40USD 11510USD 1,150
Total22.7824 pcsUSD 5,310

Two things to notice. First, 24 pieces is not a small order, but it is not a container full of tables either. The 150 cm tables eat 1.69 CBM each — six of them take more space than sixteen coffee tables. The mix is what makes the load efficient.

Second, 22.78 CBM in a 28 CBM container is normal, not waste. You cannot fill 28 CBM with furniture; the shapes do not nest. Planning at 85% is realistic. Anyone quoting you “28 CBM” is quoting arithmetic, not a shipment. See how many pieces fit in a container.

From FOB to landed

FOB Semarang means we deliver to the port and clear export; everything after that is yours. For a European destination, the build-up looks like this:

LineAmount
FOB SemarangUSD 5,310
Ocean freight (20ft, Semarang–Rotterdam)USD 1,700
CIFUSD 7,010
Import duty (wooden furniture, HS 9403)0% — confirm with your broker
Dutch VAT 21%USD 1,472
Cash needed at clearanceUSD 8,482
VAT recoverable (registered business)–USD 1,472
Net costUSD 7,010

Per piece, the net landed cost is about USD 292; the cash you need on the day is about USD 353 per piece. That gap — VAT — is the number that kills first orders when it is not planned.

Duty is the line I refuse to guess. On most wooden furniture lines under HS 9403 the rate is zero in the EU, but classification is decided by your broker, not by us. Ask for it in writing before you commit.

What the price does not include

Three costs buyers forget: inland delivery from Rotterdam to your warehouse (usually USD 300–600 for a 20ft), unloading (a container of furniture needs labour, not just a forklift), and a damage allowance of 1–2% inspected before signing the delivery receipt. Add those and the realistic landed cost per piece is closer to USD 310–320 — still workable, but only if your retail price is set from the landed number, not from FOB. See wholesale terms, MOQ and payment.

Why the timeline matters more than the price

Production is 12 weeks from deposit, and the sea leg is 5–6 weeks. Add two weeks for clearance and inland delivery, and you are looking at 19–20 weeks door to door. If you need stock for a season, the deposit date is the only date that matters.

We ask 50% deposit and 50% against the bill of lading, with photo approval before loading. That is not a formality: we photograph the actual pieces, because teak root is a one-off shape, not a catalogue SKU. See the Ø100 cm teak root coffee table: price, CBM and load plan.

The honest summary

A mixed 20ft of teak root furniture is a USD 5,300–5,500 FOB decision, roughly USD 7,000 net landed in Europe, spread across about 24 pieces at USD 290–320 each, with 19–20 weeks from deposit to your door. If those four numbers work for your project, the rest is detail. If they do not, no discount will fix it.

Request FOB prices and a load planBuild a container load →

Frequently asked questions

How many pieces fit in a 20ft container?

About 24 pieces for a mixed load like the one above, using 22.78 CBM of the 28 CBM nominal volume. Coffee tables alone would fit around 60; 150 cm dining tables around 13.

Is the price FOB or CIF?

Quoted prices are FOB Semarang. Freight and insurance are on the buyer’s account, and we can quote CIF to your port on request.

What is the minimum order?

One 20ft container, mixed models and sizes. A trial order of two pieces is possible for sampling before a container.

How long is production?

12 weeks from deposit, or 8–10 weeks if the schedule allows. Shipping to Europe adds 5–6 weeks plus clearance.

See also

Written by

Mr. August Praymunor — Overseas Marketing Director

CV. Nusantara Sourcing Agent · manufacturer and exporter of teak root furniture in Jepara, Central Java, Indonesia. We have shipped over 300 containers since 2016, loading 4×40’FCL per month for importers, hotel groups and interior contractors. Every figure in this article comes from our own price list and shipping records.

export@teakrootfurniture.com · WhatsApp +62 852 0600 7878 · LinkedIn · Jl. RA Rukmini KM.02 Pekalongan RT.02/V, Tahunan, Jepara 59428, Central Java, Indonesia

Plan the load first: build the same load yourself in the container calculator — add models, see packed CBM, FOB total and the 50% deposit.

Do you provide sourcing-agent services or factory visits?

We manufacture and export our own furniture from Jepara. We do not run a sourcing-agency service — no daily fee, no commission and no multi-supplier factory tours. Buyers are welcome to visit our workshop. For products outside our lines, we can consolidate with other suppliers into one shipment.

Share this page: