FACTORY DIRECTOEM & CUSTOMEXPORT READYMIXED CONTAINER
300+Containers Shipped Since 2016
4 x 40'FCLMonthly Capacity
1 x 20'FCLMinimum Mixed Container
12 WeeksTypical Lead Time
Manufacturer & Exporter of Teak Root Furniture · Established 2016 · Jepara, Indonesia · Shipping Worldwide
Teak Root Furniture Manufacturer for European Importers

Teak Root Furniture Manufacturer for European Importers

Handcrafted teak root furniture from Jepara, Indonesia. Indoor and outdoor collections for wholesale and export buyers.

Sculptural Teak Root Dining Tables

Sculptural Teak Root Dining Tables

Solid teak root and glass-top dining tables, produced to order and prepared for container shipment.

Organic Coffee and Side Tables

Organic Coffee and Side Tables

Natural root-base coffee and side tables — statement pieces for retail and interior projects.

Wholesale and Custom Production

Wholesale and Custom Production

Custom and OEM production for importers, retailers and hospitality projects worldwide.

Request Our Catalogue and Price List

Request Our Catalogue and Price List

Send us your target items and quantities — our team will prepare a quotation for you.

Friday, November 20, 2026

Round, Oval or Rectangular Teak Root Tables: What Fits a Room

In the third quarter of 2026 there were 5,901 hotel projects and 692,999 rooms in the United States construction pipeline, plus 525 renovation projects covering 105,365 rooms (Lodging Econometrics, U.S. Hotel Construction Pipeline Trend Report, October 2026). Every one will fit out a breakfast room, a lobby and at least one bar. In a single hotel the table-shape decision is repeated thirty or forty times, and it is usually made once, on an FF&E schedule, by someone who has never loaded a container.

Summary: Round, oval and rectangular teak root tables answer three different room problems: round seats the most people per square metre, oval seats eight to ten in a long room, and rectangular suits banquettes and walls. Packed volume runs 0.95 CBM at Ø100 cm to 2.43 CBM at the 200 cm oval, which is 9–23 pieces per 20ft container. Prices are FOB Semarang, production 12 weeks.

That is where the money goes wrong. The three shapes use the same material and roughly the same labour, but they do not cost the same to ship, seat the same number of people per square metre, or pass through the same gap between banquette and wall. Since 28 July 2026 goods from Indonesia entering the United States also carry an additional 10% Section 301 duty (USTR, 23 July 2026), and from 30 December 2026 EU buyers must hold due-diligence data for the wood they import (Regulation (EU) 2025/2650). Shape now touches cost twice: in freight, and in compliance.

Teak root dining table with a natural root base, Jepara, Indonesia

A single-root teak root dining table before crating. The base decides which top shapes are possible, not the other way round.

The short answer: round seats the most people per square metre and ships cheapest per seat; oval solves a long, narrow room but needs a two-root or branch-leg base; rectangular suits banquettes and walls but needs a frame under the top that the buyer never sees. A 120 cm round takes 1.08 CBM, a 200 cm oval takes 2.43 CBM — 22 pieces against 9 in a 20ft container.

The 60 cm rule: what each diameter actually seats

Allow 60 cm of table edge per person at a round top — 24 inches if your drawings are in feet. Almost every seating argument we have with a buyer comes back to that number. A Ø100 cm top gives four people 78 cm each. A Ø120 cm gives four people 94 cm, or six at 63 cm, which is where armchairs stop working. A Ø150 cm seats six comfortably and eight only with narrow chairs. A Ø180 cm seats eight with room to serve.

US banquet suppliers quote the same geometry in inches: a 60-inch round is listed at six to eight seats, a 72-inch at ten (Seatplan seating guide, 2026). The range exists because the chair decides the upper figure. If a hotel specifies armchairs, read the lower number.

A restaurant that pushes two-tops together should standardise on Ø120 cm: two of them make a 240 cm run that seats eight without a gap in the middle.

Oval: the long-room answer, and the base it demands

A 200 × 100 cm oval seats eight at 60 cm per cover, ten if the ends are used, and it fits a room where a 200 cm round would leave no walkway. That is its whole case — and the hardest of the three to build honestly, because a natural root carries load where the wood is, not where the drawing wants it.

Up to about 180 cm an oval can sit on one wide root. At 200 cm we build with two roots or branch legs that reach toward both ends, and we load the ends before the glass is cut. A single compact root under a 200 cm top looks correct in a photograph and flexes the moment someone leans on the end; the glass rings first, then the finish cracks at the joint. If a supplier quotes a 200 cm oval on a single small base at a price close to a round, that is why.

Glass thickness follows the unsupported span: 10 mm tempered at 200 cm, 12 mm where the base is single-root or the top is meant for restaurant use. The glass top sizes and CBM guide sets out the same logic for coffee tables.

Rectangular: corners do the work, and a frame nobody sees

A rectangular top puts load on four corners, where a root has the least material. The fix is invisible: a hardwood frame under the top, screwed into the base, spreading load back toward the centre. Buyers never see it on a sample, and it is the first thing a cheap factory leaves out.

Rectangular earns its place against a wall or a banquette, where one long side is fixed, and the depth can drop to 80 cm. A 180 × 90 cm top seats six with armchairs once you allow 60 cm per seat plus 10 cm between chairs; eight only with armless chairs pulled tight. For a banquette run, specify 120 cm modules rather than one 240 cm piece: at that length staff drag it instead of lifting it.

Send your item list for a quote →

Ready to price a container? Send the diameters and quantities you are considering, and we will confirm what fits in one load, the FOB Semarang price and a realistic lead time — including which shapes have to be built in pairs to keep the base stable.

Clearances decide more projects than style does

By the time a shape reaches a quotation, the room has usually decided it. These are the numbers we use on load plans; only the accessibility figure is a legal minimum.

DimensionMetricImperialWhy it matters
Table edge to wall90 cm36 inChair pulls out and a person walks behind
Service route behind seating110 cm44 inTray carried past an occupied chair
Accessible route91 cm36 inMinimum clear width under ADA Standards (2010), 403.5.1
Between two tables60 cm24 inBack-to-back chairs, no squeeze
Dining height75 cm29.5 inStandard chair seat at 45 cm

A 4 m × 3 m breakfast room with a 90 cm ring leaves a 2.2 m × 1.2 m core: one Ø120 cm round, not two. The same room with a fixed banquette and three 120 × 80 cm rectangles seats twelve. Neither answer is better in general; one is better in that room.

The container maths: same seats, different freight

Freight is charged on volume, not seats, which is why shape is also a purchasing decision. Our loading records put a 20ft at about 28 CBM packed and a 40ft High Cube at about 65 CBM. We plan to 85% of that, because crates are not liquid: 23.8 CBM in a 20ft, 55 CBM in a 40HC.

Shape and sizeSeatsCBM eachPieces per 20ftSeats per 20ft
Round Ø120 cm41.082288
Round Ø150 cm61.801378
Oval 200 × 100 cm82.43972
Rectangular 180 × 90 cm61.601484

Our workshop measurements, crate included, planned at 85% fill. Your mix of consoles, stools and planters will change the final count.

The gap between the first row and the third is 22% more seating for the same ocean freight — an argument a hotel owner understands faster than a mood board. A long dining room that would otherwise seat six at a 150 cm round is a good reason; a vague preference for curves is not.

Mixing shapes in one load is normal. On a 40HC, ovals go against the wall first, because their crates are long and flat, and the square gaps take rounds, benches and consoles. We build that load plan before quoting, so the FOB price reflects the real fill. The cost breakdown of a 20ft load shows what freight and duty do to the unit price.

Three dates that change the landed cost in 2026 and 2027

28 July 2026 — United States. USTR imposed an additional 10% Section 301 tariff on imports from Indonesia under its forced-labour investigation (USTR final action, 23 July 2026). Wooden furniture under HTS 9403.60.80 still enters duty-free under Column 1, so the working figure for a teak root table is 0% plus 10%, on top of the merchandise processing fee of 0.3464% of value, which is subject to an annual minimum and maximum. There is no federal VAT; sales tax is collected at retail.

14 October 2025, still working through contracts — Section 232. The timber proclamation of 29 September 2025 put 10% on softwood lumber and timber, 25% on upholstered furniture, and 25% on kitchen cabinets and vanities from 14 October 2025; the upholstered rate rose to 30% on 1 January 2026. A teak root table is not upholstered, so it does not sit in that line, but put the classification question to your broker in writing. Buyers who assumed all wooden furniture was caught, and those who assumed none of it was, have both been surprised this year.

30 December 2026 — European Union. The EU Deforestation Regulation applies to large and medium operators from 30 December 2026, and to micro and small operators from 30 June 2027 (Regulation (EU) 2025/2650). A container reaching Rotterdam in January 2027 needs a due-diligence statement with plot-level geolocation for the wood. Ask now whether your supplier can produce that per shipment, not per year: it is the difference between a document and an alibi.

MarketTariff on wooden tables (2026)Tax at importExtra paperworkPorts we load to
United States0% Column 1 + 10% Section 301No federal VAT; state sales tax at retailISPM 15 stamp, invoice, packing listLos Angeles, Savannah, Newark
EU (Germany example)0% MFN on 9403.60 — confirm your CN line19% import VAT (21% NL, 20% FR)EUDR due diligence from 30 Dec 2026Rotterdam, Hamburg, Antwerp
United Kingdom0% under the UK Global Tariff20% VATUKTR due diligence, ISPM 15 stampFelixstowe, Southampton

Rates checked against USTR, EU and HMRC material in November 2026. Tariff lines change; confirm the 10-digit code with your broker before you price a programme.

A 40-room boutique hotel, priced by shape

Here is the arithmetic we run when a developer asks which shape to standardise on. Take 40 keys, 70% breakfast uptake and a 26-cover peak: seven Ø120 cm rounds plus one spare, 8.6 CBM. Six root coffee tables in the lobby at 0.5 CBM add 3 CBM; four poseur tables at 0.7 CBM add 2.8 CBM; twelve stools at 0.22 CBM add 2.6 CBM.

Total: about 17 CBM, which fits a 20ft with roughly 7 CBM left for consoles, planters and benches — the leftover that turns a furnished room into a finished one. Swap the eight rounds for six 200 cm ovals and seating drops to 48 covers while the dining volume rises to 14.6 CBM. In a 6 m room that is the right trade; in a square room it is a mistake you pay for twice.

Teak root dining table and stool set for a hotel breakfast room, made in Jepara, Indonesia

Table-and-stool set packed together; stools fill the gaps between crates.

Why the shape gets decided in Jepara, Indonesia

Teak root is a by-product of plantation clearing in Java, and the pieces that become tables are selected by eye, not by specification. Our workshop sits in Jepara, Central Java, the carving town on Java's north coast, where the same families have worked wood for generations. A root that will carry a 200 cm oval has to be wide and stable at the base; one for a Ø120 cm round can be taller and narrower. That judgement comes before any drawing is approved, which is why we ask for the room plan and not only a photo.

Drying is the part buyers underestimate. The rainy season from November to March slows air drying, so roots go to the kiln and are checked to 8–12% moisture before machining; a table finished at 18% will open a joint within one winter. Our record: 300+ containers since 2016, about 4×40’FCL a month. If you are planning to import teak root furniture from Indonesia for the first time, the shape conversation is the right place to start: it is the cheapest decision to change and the most expensive to get wrong.

Request FOB prices and a load planBuild a container load →

Frequently asked questions

Can one 20ft container mix round, oval and rectangular tables?

Yes. Our minimum is one 20ft mixed, no minimum per model, planned to about 28 CBM packed: typically 10–14 rounds, 4–6 ovals, 10–20 coffee or side tables and the stools that fill the gaps.

Which shape is cheapest per seat once freight is included?

Round. A 20ft of Ø120 cm rounds carries about 88 covers; the same container of 200 cm ovals carries about 72. That is roughly 22% more seating for the same freight, before duty.

How far ahead should a US buyer order for a 2028 opening?

Allow about 12 weeks for a first order, four to six weeks of ocean transit to the West Coast and two to three weeks for port release and inland delivery: place the purchase order five months before installation. For a venue needed before the Los Angeles Games, which run 14–30 July 2028 (Olympics.com), that means late 2027.

Does the 10% US Section 301 duty apply to orders placed before July 2026?

It applies to goods entered for consumption on or after 28 July 2026 (USTR, 23 July 2026). An earlier invoice does not exempt a container that clears later, so check the entry date your broker expects before fixing a retail price.

Talk to us about your project

Send the room plan, the diameters you are considering and the quantities, and you will get a written answer on what fits in one container, the FOB Semarang price per piece and a lead time we can hold. If you are choosing between shapes, say so: we will price both, so the difference is visible instead of argued.

Send your item list for a quote →

Packing, loading and shipping

Container being loaded with packed teak root furniture in Jepara, Indonesia

Every top and base is wrapped in single-face carton with corner protection, and glass is crated separately with edge foam so it never rests against a root. Each crate is numbered against the packing list, and the stack plan is drawn before loading: rounds stand on edge in pairs, ovals lie flat two high, bases are braced so nothing shifts in handling. The load plan goes to your broker before the container leaves, so documents and physical load agree.

Where does the container actually leave from? Loading happens at our workshop in Jepara, Central Java, Indonesia, on the island's north coast. The truck run to Semarang port is 65–70 km, about two hours; the load is checked against the packing list, driven to the terminal and lifted onto the vessel the same week. FOB Semarang is our standard term: our responsibility ends when the container is on board.

Our office and factory stand at the same address on every document we issue: Jl. RA Rukmini KM.02 Pekalongan RT.02/V, Tahunan, Jepara 59428, Central Java, Indonesia. Buyers are welcome to inspect a load before it ships: tell us two weeks ahead.

MOQ 1×20’FCL mixed · 4×40’FCL per month · 300+ containers shipped since 2016 · export@teakrootfurniture.com

Share this page:

Written by

Mr. August Praymunor — Overseas Marketing Director

CV. Nusantara Sourcing Agent · manufacturer and exporter of teak root furniture in Jepara, Central Java, Indonesia. We have shipped over 300 containers since 2016, loading 4×40’FCL per month for importers, hotel groups and interior contractors.

export@teakrootfurniture.com · WhatsApp +62 852 0600 7878 · LinkedIn · Jl. RA Rukmini KM.02 Pekalongan RT.02/V, Tahunan, Jepara 59428, Central Java, Indonesia

See also

0 comments:

Post a Comment