FACTORY DIRECTOEM & CUSTOMEXPORT READYMIXED CONTAINER
300+Containers Shipped Since 2016
4 x 40'FCLMonthly Capacity
1 x 20'FCLMinimum Mixed Container
12 WeeksTypical Lead Time
Manufacturer & Exporter of Teak Root Furniture · Established 2016 · Jepara, Indonesia · Shipping Worldwide
Teak Root Furniture Manufacturer for European Importers

Teak Root Furniture Manufacturer for European Importers

Handcrafted teak root furniture from Jepara, Indonesia. Indoor and outdoor collections for wholesale and export buyers.

Sculptural Teak Root Dining Tables

Sculptural Teak Root Dining Tables

Solid teak root and glass-top dining tables, produced to order and prepared for container shipment.

Organic Coffee and Side Tables

Organic Coffee and Side Tables

Natural root-base coffee and side tables — statement pieces for retail and interior projects.

Wholesale and Custom Production

Wholesale and Custom Production

Custom and OEM production for importers, retailers and hospitality projects worldwide.

Request Our Catalogue and Price List

Request Our Catalogue and Price List

Send us your target items and quantities — our team will prepare a quotation for you.

Friday, November 20, 2026

Teak Root Coffee Tables with Glass Tops: Sizes, Thickness, CBM

A glass top is what turns a teak root base into a table a buyer can actually use. The base is a sculpture; the glass is the surface. Get the thickness and the overhang right and the piece sells. Get them wrong and the first container comes back as a complaint.

Summary: Teak root coffee tables from Jepara ship with tempered glass from 8 mm at Ø100 cm to 10 mm above 120 cm, and 12 mm where the top overhangs the base by more than 8 cm. Packed volume runs 0.20–0.60 CBM per piece, FOB USD 110–195, and a 20ft container carries about 40–100 pieces depending on diameter. Prices are FOB Semarang; production 12 weeks.

Teak root coffee table with glass top, Jepara
Export packing of teak root tables, Jepara

Why the top is glass and not wood

A teak root base is never flat. It rises, twists and finishes at an uneven height, and every piece is different. Sanding a root until it is flat destroys the shape that made it worth buying. Glass solves this: it sits on three or four small silicone pads, follows the highest points, and leaves the root visible underneath.

That is also why the top is usually clear rather than smoked or frosted. The buyer is paying for the root; the glass should disappear. In hotel projects we see more bronze and grey tint, because the room has a colour scheme to respect.

Thickness by diameter: the rule we build to

Top diameterGlassWhy
80–100 cm8 mm temperedShort span, light use
120 cm8 mm normal use, 10 mm for hotelsTraffic and cleaning pressure
150 cm10 mmWider unsupported span
Above 150 cm or overhang > 8 cm12 mmDeflection and edge risk

Two details matter as much as thickness. The edge should be flat-polished, not bevelled, because a bevel catches light and shows every chip. And on tables that will travel by sea, the glass should be crated separately, never laid on the root inside the carton.

Overhang: where tables fail in the container

The top should overhang the widest point of the base by 4–8 cm per side. Less looks mean; more puts a lever arm on the glass and a tipping risk on the piece. On an oval base the overhang must be measured at the widest point, not the average — this is the most common specification mistake we correct before production.

Coffee table models, packed volume and price

ModelSizeCBM/pcFOB/pc
Mawar Coffee Table 100 cm100 cm0.450USD 115
Yava Coffee Table 100 x 100 cm100 × 100 cm0.400USD 115
Karang Coffee Table 100 x 50 cm100 × 50 cm0.200USD 115
Coffee Table 100 x 50 cm100 × 50 cm0.200USD 125
Coffee Table live edge 100 x 60 cm100 × 60 cm0.240USD 125
Mawar Coffee Table 120 cm120 cm0.650USD 135
Lemma Coffee Table 120 x 120 cm120 × 120 cm0.400USD 110
Bajo Coffee Table 120 x 120 cm120 × 120 cm0.580USD 125
Yava Coffee Table 120 x 120 cm120 × 120 cm0.580USD 125
Coffee Table 120 x 60 cm120 × 60 cm0.290USD 135

FOB Semarang, 2026 list. Packed volume measured after finishing.

Notice how little volume separates a 100 cm from a 120 cm model — but how much the price moves. That gap is the commercial decision your buyer is making, not the design.

Container maths for coffee tables

Coffee tables are the cheapest volume in the collection. At 0.20–0.40 CBM each, a 20ft container at 22 CBM usable carries 55 to 100 pieces. That is why first orders usually mix coffee tables with dining tables: the coffee tables fill the gaps around the bigger pieces, and the average freight per piece drops.

Where glass breaks in transit, and what we changed

Glass does not usually break in the container. It breaks in the last 200 metres — at the warehouse, on a pallet truck, or when the showroom assistant slides the top off the crate alone. Three changes cut our breakage rate to almost nothing:

  • The top travels vertically. A glass disc laid flat at the bottom of a container carries the weight of everything above it. Standing on edge, in its own crate, it carries nothing.
  • Edge protection before wrapping. Foam on the rim, then cardboard, then the crate. Wrapping first and padding later is what chips the edge.
  • Two-person handling is printed on the crate. Not because buyers ignore it, but because it gives the receiving team the authority to refuse a one-person lift.

If a top does arrive damaged, photograph the crate before opening it. Every claim we have resolved quickly started with a photo of the intact crate, not of the broken glass.

Maintenance instructions the hotel needs

Hotels ask for a care sheet more often than they ask for a discount. What actually matters on a glass-topped root table:

IssueCauseWhat to do
Rings and hazeHard water, glass cleaner with ammoniaDamp microfibre, then dry with a second cloth. No ammonia.
ScratchesGrit dragged across the topFelt pads under everything. Deeper marks are polished, not hidden.
MovementSilicone pads compressed or missingReplace pads yearly. We ship a spare set with every container.
WobbleUneven floor, not an uneven rootLevelling shims under the base before touching the glass.

When a wood top is the better answer

Glass is not always right. A wood top — solid teak planks, or a resin-filled root — is the better choice when the piece is going into a space where children climb on furniture, where the client wants no reflections in photographs, or where the table will be used as a working surface. Wood is also cheaper to ship: no separate crate, no glass weight, and a smaller packed volume.

The trade-off is visual. The root disappears under a solid top. If the buyer is paying for the sculpture, keep the glass.

Five specification mistakes we correct every month

  1. Top wider than the base can hold. Over 8 cm of overhang per side and the piece becomes a lever.
  2. 8 mm glass on a 150 cm top. It will not break in the showroom; it will flex in the hotel.
  3. Bevel edge instead of flat polish. Bevels catch light and show chips.
  4. Glass shipped inside the same carton as the base. The cheapest saving in the quotation, the most expensive in claims.
  5. No spare pads. A 40-cent part that decides whether the table wobbles two years later.

Request FOB prices and a load planBuild a container load →

Frequently asked questions

Is tempered glass included in the FOB price?

Yes. Prices quoted are for the complete piece: root base plus tempered glass top, packed and ready for export.

Can we supply our own glass in the destination country?

Yes, and some importers do it to save freight. We then ship the base only and provide the exact top dimensions and pad positions.

What glass thickness should I order for a hotel lobby?

10 mm from 120 cm upward. In high-traffic areas we also recommend polished edges and a maintenance instruction sheet for the housekeeping team.

How is the glass protected during shipping?

It is crated separately inside the container, edge-protected, and never stacked under other cartons.

Written by

Mr. August Praymunor — Overseas Marketing Director

CV. Nusantara Sourcing Agent · manufacturer and exporter of teak root furniture in Jepara, Central Java, Indonesia. We have shipped over 300 containers since 2016, loading 4×40’FCL per month for importers, hotel groups and interior contractors.

export@teakrootfurniture.com · WhatsApp +62 852 0600 7878 · LinkedIn · Jl. RA Rukmini KM.02 Pekalongan RT.02/V, Tahunan, Jepara 59428, Central Java, Indonesia

Share this page:

0 comments:

Post a Comment