FACTORY DIRECTOEM & CUSTOMEXPORT READYMIXED CONTAINER
300+Containers Shipped Since 2016
4 x 40'FCLMonthly Capacity
1 x 20'FCLMinimum Mixed Container
12 WeeksTypical Lead Time
Manufacturer & Exporter of Teak Root Furniture · Established 2016 · Jepara, Indonesia · Shipping Worldwide
Teak Root Furniture Manufacturer for European Importers

Teak Root Furniture Manufacturer for European Importers

Handcrafted teak root furniture from Jepara, Indonesia. Indoor and outdoor collections for wholesale and export buyers.

Sculptural Teak Root Dining Tables

Sculptural Teak Root Dining Tables

Solid teak root and glass-top dining tables, produced to order and prepared for container shipment.

Organic Coffee and Side Tables

Organic Coffee and Side Tables

Natural root-base coffee and side tables — statement pieces for retail and interior projects.

Wholesale and Custom Production

Wholesale and Custom Production

Custom and OEM production for importers, retailers and hospitality projects worldwide.

Request Our Catalogue and Price List

Request Our Catalogue and Price List

Send us your target items and quantities — our team will prepare a quotation for you.

Saturday, November 21, 2026

Teak Root Table Weight: Why It Decides Your Freight

Summary: On teak root furniture, cubic metres decide freight, not kilograms. A 20ft works at 23.8 of 28 CBM, and our list runs from 0.20 CBM / USD 115 (Karang coffee table, 100 × 50 cm) to 2.43 CBM / USD 650 (Mawar dining table, Ø 200 cm) — 119 pieces against 9 in the same box. Weight only binds on a 40ft HQ or on air and courier samples. MOQ one 20ft mixed container, lead time 12 weeks.

Ask a first-time importer what decides the freight on a teak root table and the answer is almost always weight. On the water it is usually wrong. A root table is an object made mostly of shape: the root was hollow in places, the top is a slice, and the carton is sized by the widest point of something that was never a rectangle. What a container runs out of is cubic metres.

Weight is not irrelevant, it is situational. Three moments exist where the kilogram takes over from the cubic metre; knowing which applies avoids the two classic errors: paying air rates on a piece that should have sailed, and booking a 40ft HQ for a load that hits its payload ceiling at 60 percent fill.

Teak root dining table with a solid root base, photographed in Jepara before packing

What our models actually consume

The table is our model list sorted by volume. CBM is packed volume per piece, the figure that goes on the booking; FOB is Semarang. The last three columns are arithmetic on those numbers.

Model Size CBM FOB USD Pcs / 20ft FOB per CBM Share of 23.8 CBM
Karang coffee table100 × 50 cm0.20115119USD 5750.84%
Live-edge coffee table100 × 60 cm0.2412599USD 5211.01%
Console Gold100 cm0.3012579USD 4171.26%
Mawar coffee tableØ 120 cm0.6513536USD 2082.73%
Cabak dining table120 cm1.0826522USD 2454.54%
Oval root dining table200 cm1.5036515USD 2436.30%
Mawar dining tableØ 200 cm2.436509USD 26710.21%

Read the middle and last columns together and the freight story appears. A Karang 100 × 50 table takes 0.84 percent of a container and brings USD 115 of FOB value. A Mawar Ø 200 cm table takes 10.21 percent and brings USD 650. Consoles and small coffee tables are the best freight citizens in the range; the big round dining table is the worst by that measure.

The three moments where weight decides

1. The payload ceiling of the box you booked

A 20ft has a maximum gross of about 30,480 kg and a tare near 2.2 tonnes, leaving a payload ceiling around 28 tonnes. A 40ft HQ offers roughly 76 CBM of internal volume but a payload ceiling near 26.5 tonnes.

On a 20ft, teak root loads cube-out. Even 23.8 CBM of solid teak at 650 to 700 kg per cubic metre comes to under 17 tonnes, and a root table is not solid — it is a wall of root around a hollow with a top on it. On a 40ft HQ the ratio flips at the margin: 76 CBM of compact, dense items such as consoles and nested stools can approach the payload ceiling while the top of the box is still empty. That is the load where weight decides, and where the stack plan must be drawn before the order is confirmed.

2. Handling at the destination

The part that never appears on a quotation and always appears on an invoice. A 200 cm root table arrives in a crate two people cannot carry up a service stair. A hotel with a 900 kg goods lift, a narrow corridor and a stone floor turns the weight into a decision: four handlers, a stair trolley, or a crane for the terrace — all billed per hour. We therefore quote two numbers per model: packed CBM, and gross weight per carton from the packing list.

3. What you can stack on top

Root is strong in compression along the grain and weak across an unsupported top. A container is a stacking problem: 79 consoles do not travel 79 high, they travel as a block, and dining tables go in their own bay with nothing resting on the centre of a glass top. Weight per carton tells the loader which cartons go at the bottom and which stay on top. Get that wrong and the damage surfaces as a cracked top nobody can attribute.

Oval teak root dining table, 200 cm, shown with its single root base

Cube-out or weigh-out: the two-minute audit

Before accepting a quotation, multiply CBM per piece by quantity, add the lines, and compare with 23.8 CBM for a 20ft or about 65 CBM for a 40ft HQ. Then ask for total gross weight against the payload. Whichever limit you reach first sets your freight.

A mixed order shows how. Nine Console Gold 100 cm at 0.30 come to 2.70 CBM. Six Cabak 120 cm tables at 1.08 come to 6.48. Four oval 200 cm tables at 1.50 come to 6.00. Two Mawar Ø 120 coffee tables at 0.65 come to 1.30. Total 16.48 CBM, leaving 7.32 — enough for 24 more Karang tables at 0.20, or one more 200 cm table plus a dozen consoles. You are filling a box, not loading a truck, and the audit never needed a kilogram figure.

Why identical models weigh different amounts

Teak root is not a board. Each base is selected for shape, so one root may have a thicker wall, a denser heart or a larger void filled and sanded. A glass top changes the arithmetic: flat, heavy for its area, and crated separately with corner protection, which adds volume as well as mass. Moisture matters too — timber dried to a stable 12 percent is lighter than green root. We dry, weigh, pack, and record the result per carton.

Compact teak root coffee table, the type of piece that carries the most FOB value per cubic metre

Where the kilogram really drives the price: samples and air

Air freight charges 1 CBM against 167 kg and express couriers about 1 CBM against 200 kg, so a bulky 200 cm table is economically absurd to fly — you pay for the air inside the carton. Sample orders are therefore built from the compact end of the range: a Karang coffee table at 0.20 CBM, a side table, a stool. The big pieces are approved from photographs, drawings and a factory visit. If a supplier offers to air-freight a 2.43 CBM table as a sample, the freight will exceed the table's value.

What to put in the request

Send the model or size, quantity, destination port and delivery context — showroom, fifth-floor hotel, outdoor terrace. We return CBM per piece, pieces per 20ft, FOB Semarang, gross weight per carton and a stack plan. For LCL the same CBM becomes chargeable volume at 1 CBM = 1,000 kg; only the rate changes.

Weight is not the enemy of a teak root shipment. Ignoring it is. Know which of the three limits applies — payload, handling or stacking — and the rest of the freight calculation falls into place behind the cubic metre.

Request FOB prices and a load planBuild a container load →

Frequently asked questions

How much does a teak root dining table weigh?

It depends on the root, so we publish no single kilogram figure per model. Every carton is weighed before loading and the gross weight is written on the packing list that travels with the documents. Two pieces of the same 200 cm model can differ because one root was denser or thicker-walled. What we fix in the quotation is the CBM.

Is teak root furniture too heavy for a 20ft container?

No. The payload ceiling is roughly 28,000 kg and teak root is volume-limited long before that. At 23.8 CBM even solid teak at 650 to 700 kg per cubic metre stays under 20 tonnes. The 20ft runs out of cubic metres first; a 40ft HQ is where weight can bind.

Why is LCL charged on CBM instead of kilograms?

LCL carriers apply a chargeable-weight rule of 1 CBM = 1,000 kg and bill whichever is higher. Teak root sits well below that density, so volume wins. Air uses 1 CBM = 167 kg and express about 200 kg, which is why samples travel differently.

Can I mix light and heavy models in one container?

Yes, and most buyers do. The limit is total CBM against the 23.8 CBM working capacity of a 20ft, plus the floor area each footprint occupies. Heavy compact pieces go at the bottom, large tables in their own protected bay, and the total stays under the volumetric ceiling. Send the item list for a load plan.

Written by

Mr. August Praymunor — Overseas Marketing Director

CV. Nusantara Sourcing Agent · manufacturer and exporter of teak root furniture in Jepara, Central Java, Indonesia. We have shipped over 300 containers since 2016, loading 4×40’FCL per month for importers, hotel groups and interior contractors in Europe and North America. Every price and volume in this article comes from our own model list and shipping records.

export@teakrootfurniture.com · WhatsApp +62 852 0600 7878 · LinkedIn · Jl. RA Rukmini KM.02 Pekalongan RT.02/V, Tahunan, Jepara 59428, Central Java, Indonesia

Share this page:

0 comments:

Post a Comment